Olympus DS-4000 manual Connecting to Your PC Using the Cradle, Connecting Recorder to PC

4

Connecting Recorder to PC

Connecting Recorder to PC

Connecting to Your PC Using the Cradle

Place the recorder in the cradle

1 Insert end A of the USB cable to your PC’s USB port or USB hub.

2 Connect end b of the USB cable to the cradle.

3 Turn ON the recorder, then set the recorder in the cradle.

If “REMOTE” is displayed on recorder, it indicates proper connection.

Disconnecting Recorder from PC

To avoid data corruption or loss, make sure that the recorder’s record/play indicator lamp isn’t flashing, before removing the recorder from the cradle or disconnect the cable from the recorder terminal.

........................................................................................................

Notes

•Never touch the contact points at the bottom of the cradle, as that may cause bad connection.

•With a PC connected, the recorder cannot be operated with the foot switch (RS25/26). When connecting the recorder to a PC via the cradle, remove the foot switch.

54