Omega Vehicle Security zSeries manual DIP Switches DIP Switch Setup Device ID did

2.7 DIP Switches

2.7.1 DIP Switch Setup: Device ID (DID)

The End Device is shipped with all DIP switches in the "OFF" position.

For each End Device you can setup the unique Device ID using DIP switch #1 - 5.

The Device ID also determines the Group of the End Device. The Coordinator puts every eight End Devices into a Group so that the system is more manageable.

You can setup the Network ID (NID) (which is the same as the Coordinator’s) with DIP switches # 6 - 8. Refer to Section 2.7.2.

Device
	ID
	0
	1
A	2
GROUP	3
	4
	5
	6
	7
	8
	9
B	10
	11
GROUP	12
	13
	14
	15

							ON OFF
			NID			8	8
							1
			DID
				ON OFF
					(Shown in 1			End Device
				"OFF" Position)
							(cover removed)
1	Figure 2.7 Device ID (DID) - 8 Position DIP Switch Setup
		2	3		4	5	Device		1	2	3
OFF		OFF	OFF		OFF	OFF		ID	OFF	OFF	OFF
								16
ON		OFF	OFF		OFF	OFF		17	ON	OFF	OFF
OFF		ON	OFF		OFF	OFF	C	18	OFF	ON	OFF
ON		ON	OFF		OFF	OFF	GROUP	19	ON	ON	OFF
OFF		OFF	ON		OFF	OFF		20	OFF	OFF	ON
ON		OFF	ON		OFF	OFF		21	ON	OFF	ON
OFF		ON	ON		OFF	OFF		22	OFF	ON	ON
ON		ON	ON		OFF	OFF		23	ON	ON	ON
OFF		OFF	OFF		ON	OFF		24	OFF	OFF	OFF
ON		OFF	OFF		ON	OFF		25	ON	OFF	OFF
OFF		ON	OFF		ON	OFF	D	26	OFF	ON	OFF
ON		ON	OFF		ON	OFF	GROUP	27	ON	ON	OFF
ON		OFF	ON		ON	OFF		29	ON	OFF	ON
OFF		OFF	ON		ON	OFF		28	OFF	OFF	ON
OFF		ON	ON		ON	OFF		30	OFF	ON	ON
ON		ON	ON		ON	OFF	10	31	ON	ON	ON

4 5

OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON