3.5.2 Changing TCP/IP Properties on Your Computer
Go to your computer’s Control Panel then Network Connections.
Pick the network with the proper Ethernet card. Right click and choose Properties
Look for Internet Protocol, click on it and press Properties
Figure 3.2 Network Connections
Setup the IP address (in this case, 192.168.1.1) as shown below and press OK
.
You can access the Coordinator’s web server via any internet browser using IP address of 192.168.1.200.
Once you log into the Coordinator’s web server, you will be able to change its IP configuration according to
Section 4.2.
After you configure the Coordinator’s IP configurations, you should go back and set your PC’s previous IP settings.
Figure 3.3 Network Connections
16
