4.3.2 Get Readings from the End Device

Once you see the End Device’s LED blinking periodically, it means it is sending data which will appear on the “Readings” page. To view the data in a chart format, you can use the “Chart” page.

Click on Readings from the Home Page, the following page will appear. Select the proper Group to view the readings.

READINGS

Address http://192.168.1.200

READINGS: BY GROUP

Group A Wireless Sensors ID: 0 - 7

Group B Wireless Sensors ID: 8 - 15

Group C Wireless Sensors ID: 16 - 23

Group D Wireless Sensors ID: 24 - 31

Sensor Setup

Main Menu

Figure 4.7 Select Readings by Group

In a few seconds the following page will appear, showing updates of the Temperature, Barometric Pressure and Humidity values (depending on your available sensors).

.

Figure 4.8 Readings

23

Page 29
Image 29
Omega Vehicle Security zSeries manual Get Readings from the End Device, Select Readings by Group