NEW CODES
NOTE: This section only applies after you have performed a download of new device codes (see SYSTEM – UPGRADE on page 36).
NOTE: Make sure the device you want to add is turned on (not in standby).
After downloading, MOSAIC will store the new device codes in memory. An additional soft key, labelled NEW CODES, will appear on the DEVICE SETUP Menu which you will use to find a working code for a selected device.
1.Tap on Setup key (upper left corner).
2.Tap on DEVICE SETUP.
3.Tap on the NEW CODES key. You will see the UPGRADE Test Menu.
NOTE: To return to a previous menu, tap on the ESC key. To return to
Esc | DEVICE SETUP | ? |
Welcome to Device Setup! | ||
| What method |
|
| would you like to use? |
|
| BY BRAND |
|
| BY SEARCH |
|
| BY CODE |
|
| DELETE |
|
Tap on | NEW CODES |
|
Tap on
Esc UPGRADE OK
Use the scroll bar to try each one in turn.
TV1VCR 2 | Test | |
PWR | ||
TV2 | ||
TV3 | 1 | |
TV4 | ||
TV5 |
| |
VCR1 |
| |
VCR2 |
| |
VCR3 |
| |
VCR4 |
| |
VCR5 |
|
4.Tap on the first code in the list (e.g., TV 1), aim MOSAIC at the desired device (e.g., television), and tap on the PWR key. The device should turn off. If it does not respond, tap on the next code in the list (e.g., TV 2), then tap on the PWR key again. If the device still does not respond, repeat this process by testing each code until you find one that works.
NOTE: Depending on your download, the code list may include more than one device type.
5.To save a code that works, tap on the OK key. You will see the UPGRADE ADD/REPLACE menu that lists two choices.
10 | www.oneforall.com |
