HOME THEATER

Although you may think Home Theater is an independent device mode, it is actually a programmed composite of the most-frequently-used home-theater functions taken from the devices configured in MOSAIC. This composite screen is accessed via a dedicated soft key, labelled THEATER, at the top of of all Device Screens. When it is tapped, MOSAIC will display your selected functions including any related macros.

Home Theater also allows you to program a separate “Power On” macro that will power on all your favorite home theater devices with the tap of a single key.

PROGRAMMING HOME THEATER DEVICES

1.On the Device Screen in the upper left corner, tap on Setup. You will see the main SETUP Menu that greets you and asks, “What would you like to configure?

2.Tap on the PERSONALIZATION key. You will see the PERSONALIZATION Menu.

NOTE: To return to a previous menu, tap on the ESC key. To return to last-displayed Device Screen, press down on ESC or MUTE for at least 2 seconds. For help, tap the ? key.

3.Tap on the HOME THEATER key. You will see seven device categories listed in the THEATER SETUP Menu.

Esc PERSONALIZATION ?

Welcome to Personalization! What feature

would you like to program?

MACROS

MOVE KEY

LEARN

LABEL KEYS

KEY MAGIC

VOLUME LOCK

VIEW/DELETE

Tap on HOME THEATER

Esc THEATER SETUP

?

 

 

 

Configure the remote control to match your Home Theater.

What device is used for:

Tap on Video Playback

Audio Playback

Menu Source

Audio Source

Pro-Logic

Channel Source

PIP

Program Power Macro

NEW

Esc THEATER SETUP

Which device you use for

Video Playback.

TV CBL VCR

Tap on

deviceCLEAR (e.g.,VCR).

4.Tap on the Video Playback key. You will see the THEATER SETUP Device Selection Strip, as shown on the next page.

5.Tap on the device you want to set up as your video playback device (e.g., VCR). If you select a device that has a transport (e.g., VCR), necessary control keys will be added to the display. To make a different selection, tap on the ESC key and repeat this step.

6.To save your selection, tap on the OK key. MOSAIC will return to the Theater Setup Screen.

7.Repeat steps 4 through 6 for all remaining device categories. When you’re finished, continue onto the next section to program a Home Theater “Power On” macro.

NOTE: To return to a previous menu, tap on the ESC key. To return to last-displayed Device Screen, press down on ESC or MUTE for at least 2 seconds.

www.oneforall.com

33

Page 34
Image 34
One for All URC-9990 manual Programming Home Theater Devices