One for All URC-9990 manual Tap on

Esc BRAND SET OK

Your brand has multiple types; use the scroll bars to try each one in turn.

Esc BRAND SET ?

Would you like to

ADD the device or REPLACE

it with an existing one?

Tap on

Esc BRAND SET OK

Press OK to confirm.

CBL VCR VCR

Nokia

VCR 1

VCR 2

Tap on if 2nd VCR

Test

PWR

VCR 3

VCR 4

VCR 5

1

ADD

REPLACE

VCR 6

Tap on if 1st VCR

BRAND SET

Relabel the device?

CBL VCR VCR

YESNO

•To relabel the device key, tap on the YES key and you will see the LABEL Menu (see explanation on page 25 step 6).

•To keep the label the same, tap on the NO key.

You will see a confirmation screen that says the key has been successfully programmed. To program another device, tap on the ESC key. To return to the Device Screen, press on ESC or MUTE for at least 2 seconds.

To test remote control of the newly-added device, tap on its key on the Device Selection Strip. Try using the Hard Keys to adjust volume and change channels. Try tapping on the Page Arrows to access other remote control functions and then try tapping on the soft keys on each page to test them.

NOTE: Remember to press the correct device key before operating your device. Only one device (CD, amplifier, cassette, etc.) can be assigned to a device key. If your original remote operates more than one device (for example, a receiver, CD player and cassette player in one remote), you need to set up each device separately.

6 www.oneforall.com