Optiquest iRIS 320, iRIS 220 manual GPRS/CDMA-1X Schedule Cfg Level

iRIS 220 / iRIS 320, V1.19 User Guide - 30

4.3.7 GPRS/CDMA-1X Schedule Cfg (Level 4)

The schedule set-up menu is provided to configure the GPRS/CDMA-1X communication schedule.

NOTE: If the Callback mode (Option 6 in Section 4.3.3) is not set to 1 (GPRS/CDMA), then this schedule has no effect.

*Schedule Cfg

0 Exit

1 Duration [300sec]

2 Frequency [60min]

3 Start Time [0600]

4 End Time [1800]

5 Send when [0 samples]

6 Data Format [Samples only]

>

Option 0

Select this option to return to the Comms Cfg menu.

Option 1

When this option is selected you will be prompted to enter the length of time in seconds that you want the iRIS to keep each GPRS/CDMA-1X session active.

> Duration (sec)=

Enter a value of 0 if you want to maintain a continuous GPRS/CDMA-1X session.

Option 2

When this option is selected, you will be prompted to enter the length of time in minutes between each successive GPRS/CDMA-1X session being established.

> Frequency (min)=

Option 3

When this option is selected you will be prompted to enter a string representing the time at which the iRIS 320 is allowed to start establishing GPRS/CDMA-1X sessions.

> Start Time (HHNN)=

Option 4

When this option is selected you will be prompted to enter a string representing the time at which the iRIS 320 must stop establishing GPRS/CDMA-1X sessions.

> Stop Time (HHNN)=

In this example, the GPRS/CDMA-1X link is established once per hour (frequency = 60 minutes), for a time of 5 minutes (duration = 300 seconds) starting at 6:00am and ceasing after 6pm. Set the start time to 00:00 (0000) and end time to 23:59 (2359) for the on/off cycle to apply regularly throughout the complete day.

30 iQuest (NZ) Ltd - PO Box 15169, Hamilton, New Zealand Tel: +64 7 857-0810 Fax: +64 7 857-0811 Email: iquest@iquest.co.nz