Optiquest iRIS 220 manual GPRS/CDMA-1X Cfg Level, Press Esc then Enter to enter an empty string

27 - iRIS 220 / iRIS 320, V1.19 User Guide

4.3.4 GPRS/CDMA-1X Cfg (Level 3)

The GPRS/CDMA-1X set-up menu is for configuring the specific GPRS/CDMA-1X connection settings.

*GPRS/CDMA-1X Cfg

0 Exit

1	APN [iquest.co.nz] (for GPRS)	- Reserved – (for CDMA)
2	LogIn [,]
3	Skt A IP [0.0.0.0]
4	Skt A Port [7778]
5	Skt B IP [0.0.0.0]
6	Skt B Port [7777]
7	IP Acceptance
8	Schedule
9	Network Info
>

Option 0

Select this option to return to the Comms Cfg menu.

Option 1

When this option is selected you will be prompted to enter a GPRS APN (Access Point Name). This option is not applicable for CDMA - the menu entry will be – Reserv ed - and this choice will be ignored.

> APN=

Enter the name of the APN allocated by your GPRS network provider (e.g. iquest.co.nz).

Option 2

This option is where the GPRS/CDMA-1X login parameters (user name and password) are configured. When this option is selected you will be prompted firstly to enter a user name, then a password. Many providers do not require any login credentials, in which case these parameters should be set to empty.

Press Esc then Enter to enter an empty string.

> User Name=

Enter the user name required by your GPRS/CDMA-1X network provider.

> Password=

Enter the password required by your GPRS/CDMA-1X network provider.

Option 3

When this option is selected you will be prompted to enter an IP address to use for socket A. The iRIS uses Socket A for ASCII communication. This is the destination IP address used for unsolicited ASCII calls.

> Skt A IP=

Enter the remote IP address you want to have ASCII messages delivered to by default.

Option 4

When this option is selected you will be prompted to enter a port number to use for socket A.

> Skt A Port=

Enter the remote port number that you want to have ASCII messages delivered to by default (e.g. 7778).