47 - iRIS 220 / iRIS 320, V1.19 User Guide
Sensor Settings Screen 5/5 - Alarm 2 (Level 5)
Sensor Alarm screen 2 shows the same information as Alarm screen 1, but for Alarm #2.
ALARM#2 5/5
/6.1000
\ 6.2500 ;(min) 00000
+/- | Move forwards/backwards through sensor setting screens. |
Alt Enter | Move up to Sensor Status screen |
Sensor Calibration Screen (Level 5)
The Sensor Calibration screen is used for entering a calibration offset. The top value on the display is the current sensor reading. The bottom value on the display is the actual reading as determined from a gauge board or similar physical reference. The calibration offset is automatically calculated from these two values.
CALIBRATION 11.6000
+0.8000 = 12.4000
+/- | Increment / decrement actual value |
Enter | Multiply actual value by factor of 10 |
Alt Enter | Move to Calibration Acceptance screen |
Sensor Calibration Acceptance Screen (Level 5)
The Sensor Calibration Acceptance screen is used to accept or decline the sensor calibration.
ACCEPT?
>No
Yes
+/- | Move down / up through available options |
Enter | Accept current selection |
Sensor Data Screen (Level 5)
The Sensor Data screen is used to view the logged sample data for a sensor. The data pointer value for the top sample is displayed on the top right hand side.
DATA 108 1375 13:00 1372 13:30 1371 14:00
+/- | Move forwards/backwards through sample values. |
Alt Enter | Move up to Sensor Status screen |
Alt +/- | Pan left/right to view the rest of the sample time & date information. |
5.2.7 Totaliser Related Screens
The Totaliser screens show yesterday's total, the daily (since 00:00:00 today) and running totals for the two pulse input counters.
Total Screen 1/2 (Level 3)
TOTAL | ½ |
Yst | 134.6 |
Day | 17.8 |
Run | 5432.4 |
|
|
+/- | Move forwards/backwards through sensor total screens |
Enter | Drill down to Total Reset screen |
Alt Enter | Move up to Main Menu screen |
