Optiquest iRIS 220, iRIS 320 manual Display Menu Structure, Level Level6

43 - iRIS 220 / iRIS 320, V1.19 User Guide

5.2.4 Display Menu Structure

The actual LCD screens that are available will depend upon the level of access that has been enabled (no access, not logged-in, or logged-in). The screens available in each mode are shown below:

1. Minimum Access (PIN code = 0, Log-in is not possible)

Level 0	Level 1	Level 2	Level 3	Level 4	Level 5	Level6
	Status 1
	Status 2
	Status 3
	Status 4		Totalisers [1..2]

2. View Only Access (PIN code <> 0, but user is not logged-in)

Level 0 Level 1 Level 2 Level 3 Level 4 Level 5 Level6

Log-In

Status 1

Status 2

Status 3

Status 4

Main Menu

Sensors [1..9]

Sensor Menu

Sensor Data

Totalisers [1..2]

Comms Status

3. Full Access (PIN code <> 0 and user is logged-in)

Level 0 Level 1 Level 2 Level 3 Level 4 Level 5 Level6

Log-In or Log Control

Status 1

Status 2

Status 3

Status 4

Main Menu

Sensors [1..6]

Sensor Menu

Sensor Settings [1..5] Sensor Calibration Sensor Data

Totalisers [1..2]

Totalisers Reset

Comms Status

Comms Menu

Comms Settings [1..9] RS232 Cfg

Comms Enable Comms Test

To move down a level in the menu structure, press the <Enter> key. To move up a level press the <Alt> and <Enter> keys simultaneously. You can loop through the screens that are followed by a number in square brackets (e.g. [1..4]) by pressing the + or - keys (stepping forwards and backwards respectively).