S E T T I N G U P

1

TIP If your Treo 750 does not turn on after you insert the battery, you need to connect it to the AC charger to charge it; see Charging the battery. If it still doesn’t start, perform a soft reset; see Performing a soft reset for information.

6Follow the onscreen instructions to finish the installation.

7If your SIM card is not already activated, follow the activation steps provided by Cingular, or contact Cingular directly for assistance. If you plan to use email and web browsing, you need high-speed data service from Cingular in addition to your service contract. You may also need high-speed data service to send and receive multimedia messages.

TIP You can buy an extra battery as a spare for long airplane trips or periods of heavy data use. To ensure proper functioning, be sure to use batteries from Palm only. Visit www.palm.com.

Charging the battery

Although the battery may come with a sufficient charge to complete the setup process, we recommend that after setup you charge your Treo 750 for three hours (or until the indicator light is solid green) to give it a full charge. See Maximizing battery life for tips on making your battery’s power last longer.

BEFORE YOU BEGIN Make sure the battery is inserted before you charge. If you connect your Treo 750 to a power source without the battery inserted, nothing happens.

1Plug the AC charger into a wall outlet.

2With the arrow on the connector facing up (toward your Treo 750 screen), connect the charger cable to the bottom of your Treo 750.

C H A P T E R

C H A R G I N G T H E B A T T E R Y

9

 

 

Page 17
Image 17
Palm 750 manual Charging the battery, Follow the onscreen instructions to finish the installation