Selecting HotSync setup options
To set the HotSync options on a Mac computer:
1.
2.Click the HotSync Controls tab, and select any of the following options.
HotSync Enabled/ Disabled
Enable HotSync software at system startup
Activates the transport monitor and prepares your Mac computer to synchronize with your handheld. By default, the transport monitor is enabled listen on USB and PalmConnect whenever you start your computer.
If you use an optional serial HotSync cradle/cable and you use the same serial port for other devices besides the HotSync cradle/cable, disable the transport monitor and then enable it manually only when you connect the cradle/ cable to perform a HotSync operation.
Activates the transport monitor automatically each time you start your computer. If this option is not selected, you must open HotSync Manager and select the Enabled option before you can perform a HotSync operation.
Show more detail | Includes more troubleshooting information in the log that is |
in HotSync Log | generated when you perform a HotSync operation. |
3.If you are using the USB cradle/cable, you do not need to adjust the settings on the Connection Settings tab for a direct HotSync operation; they are set automatically when you perform the first HotSync operation.
159