| Recharging problems |
My phone connection drops | ■ You need to increase the Idle timeout setting on the |
before I finish using it. | Network Preferences Details screen. See “Adding detailed |
| |
| instructions. |
I get an error message when I try | ■ Make sure that the proper phone driver is installed on your |
to dial a phone number using | handheld. See “Updating the phone files on your |
my handheld. | handheld” in Chapter 12 for instructions. |
| ■ You may need to go through the pairing process on both |
| your handheld and your phone. See “Connection |
| Preferences” in Chapter 17 for information on completing |
| the pairing process on your handheld. See the |
| documentation included with your phone for assistance |
| with completing the pairing process on your phone. |
| ■ Check the Phone Preferences screen and make sure the |
| correct phone connection is selected. |
Recharging problems
Problem | Solution |
When I place my handheld in the cradle/cable, the indicator light does not go on.
■Confirm that your handheld is well seated in the cradle/ cable.
■Confirm that your recharger cable is properly connected to the back of the cradle/cable’s USB or serial port connector that plugs into your computer.
■Confirm that your recharger is plugged into an AC outlet that has power.
■If you have not used your handheld for a long period, such as an extended vacation, the battery may not contain enough charge to power the indicator light. After your handheld has recharged, the indicator light will function normally.
261