Audio Test menu | Panasonic AJ-HD2000, AJ-HD3000, AJ-HD2700 specification

AUDIO TEST menu

This menu is displayed by pressing the following keys:

F1 F2 F3

TEST

F4

>F3

F13

F12

F11

F10

F9

F5

F6

F7

F8

Key	Key designation	Description
F1	CH-1	Sets the CH1 analog input/output reference level.
F2	CH-2	Sets the CH2 analog input/output reference level.

F3	CH-3	Sets the CH3 analog input/output reference level.

F4	CH-4	Sets the CH4 analog input/output reference level.
F5	CUE	Sets the CUE input/output reference level.

F6	MONI.L	Sets the monitor L channel output reference level.

F7	MONI.R	Sets the monitor R channel output reference level.
F8	EXIT	Returns the VTR to the TEST menu screen.

F9	REF.LEV	Sets the PCM audio reference level. (This can be done only in
		the servicing engineer mode.
		≥When the F9 and F keys are pressed together, the reference
		level (Fs) toggles between j18 dB and j20 dB.

F10	IMPED.	Sets the input impedance. (This can be done only in the
		servicing engineer mode.)
		≥When the F10 and F keys are pressed together, the input
		impedance is toggled between 600 ohms and HIGH.
F11	——

F12	OUT LEV.	Sets the analog output reference level.
		≥When the F12, BS and F keys are pressed together, the names
		of the F1 to F7 menus are displayed, and switching between
		them is acknowledged.

F13	IN LEV.	Sets the analog input reference level.
		≥When the F12, BS and F keys are pressed together, the names
		of the F1 to F5 menus are displayed, and switching between
		them is acknowledged.

– 157 –

Image 157

Panasonic AJ-HD2000, AJ-HD3000, AJ-HD2700, AJ-HD3700A, AJ-HD3700BE manual Audio Test menu

Contents

Operating Instructions Software Contents Test IC Card Error LOG Menu screen transitions Multi CUE F8 Multi CUE SET UP Assemble Manual Edit S T Turn on the power Home menu is displayed Turning on the power ∑ Display lamps Home menu displays SD Free HD FreeDual ∑ Remaining tape time ∑ Setting mode display area∑ User file display ∑ Time code displays 00 00 00 ∑ Setting the initial value for the time code Press the 4 cursor key Cue time now appears in reverse video ∑ Setting and checking the cue time This menu is displayed by pressing the following key Home Home menu Key Key designation Description ResetHold ALL Free Digital SD SDI SD SDI OUTAudio Mixer Analog This menu is displayed by pressing the following keys Home Home SET UP menu FRAME1 FieldFine Coarse Sets the stop/still still picture mode holding time After pressing the F11 key, turn the Adjust controlPreroll Still ∑ Reference Press the ENT key. The setting is now enteredCenter cursor key Cursor key ∑ Programmed play function This menu is displayed by pressing the following key Video in menu INT SG DigitalRamp Black Video OUT HD menu BLACK.L F3 PRConvert This menu is displayed by pressing the following keys Video OUT HD SET UP menu Line Conv Serial SYS PhaseInterp OFF Eemode Video OUT HD SET UP State menu ∑ Selecting the TAPE/EE output signals Video OUT SD menu Transfers the VTR to the Video OUT SD SET UP SDI menu Transfers the VTR to the Video OUT SD SET UP CompositeCmpst Menu screen Video OUT SD SET UP Composite menu Clip Comb FILSYS SC SYS H Through The E-E through mode AV minimum delay mode Video OUT SD SET UP Cmpst State menuOr Audio OUT F8 F12 Is established ∑ Selecting the TAPE/EE output signals Video OUT SD SET UP SDI menu With the 480/59.94i format FINE/COARSEWith the 480/59.94p format With the 576/50i format ALL on Video OUT SET UP Line BLK video output line blanking menuALL OFF Move the cursor and select the lines to be blanked ∑ Setting the line blanking Video OUT SD SET UP SDI State menu Video OUT SET UP State menu Hdtosd Video OUT Convert menuSdtohd Hdtohd Video OUT Convert Hdtosd menu 75/1.0/1.25/1.5/2.0/3.0 Hfilter EnhanceHfilter Response Vfilter Enhance Sets the the picture quality horizontal frequency bandwidth 0/2.0/3.0/4.0/5.0/6.05/1.0/1.5/2.0/3.0/4.0 Sets the the picture quality vertical frequency bandwidth Video OUT Convert Sdtohd menu Video OUT Convert Hdtohd menu Controls the enhancement adjustment of the converter output Audio in menu PCM CUECH-MIX Audio in PCM Input Select menu Digital AnalogAES CH6 Selection is made in line with the CH5 setting using Selects the signals of the analog CH2 inputF10 CH-6 ANA CH2 Audio in CUE Input Select menu Source Mixes the playback signalsNo mixing This menu is displayed by pressing the following keys Audio Audio in SET UP menu Tone ∑ Switching the audio level meter scaleFr in increments of 1/10th of a frame ∑ Formats supported ∑ Operation Select Audio in CH-MIX Select menuCH-MIX on CH-MIX OFF ∑ Mix-and-record ONotesN Sound output based on VTR’s mode and F6, F7 key statuses Audio OUT menu SDI Asign Monitor Audio OUT Monitor menu Moni ShtlVAR ADD Audio OUT SET UP menu Full Auto CPY3 Rate CON2 F11 Rate CON key ∑ Fade function Audio OUT SET UP State menu Video OUT SET UP State menu Audio OUT SDI Asign menu Sdtosd Sdaud TC/CHR menu LTC EXT LTCVTC Slave TC.UB TC.STTC.TC ERR ∑ Changing the superimposing position Time code displays CTL1 Control signal∑ Time code displays and VTR’s operating modes TCG COMP.CPU Error ∑ Error information displaysSystem Error other error VTR’s operating modes ∑ Superimposed displays of format information ∑ Superimposed displaysSYS=23 TAPE=24 30LTCR 01 04 37 24LTCR 01 04 37 Table of user bit settings This menu is displayed by pressing the following keys TC/CHR TC/CHR SET UP menu VITC.L TCG OUTVitc LTC SD mode TC/CHR SET UP VITC.L menuHD mode ∑ Selecting the line where Vitc is to be inserted TC/CHR Convert menu Tcsync point setting∑ 2-level and 3-level time code displays ≥Front panel 30TC 24TC ∑ Setting the TC Sync value ∑ Concerning the TC Sync value and sync phase settingsHD Super LTC OUT OEditing accuracyN VAR Limt F10 OFF OPoints to noteN Ltcout Multi CUE menu Protect Transfers to the Multi CUE SET UP menu screen ∑ Protecting pages ∑ Switching the pages∑ Entering cues Pagef ∑ Clearing cue data ∑ Changing cue points∑ Clearing all the cue points Multi CUE SET UP menu Auto Step PAG ModePAG CLR ALL CLR INSERT/ASSEMBLE INSERT/ASSEMBLE Manual Edit menuAuto Edit CH Select Insert Manual Edit CH Select menu CH1 ON/OFF VideoCH2 ON/OFF CH3 ON/OFF Keys to display this menu INSERT/ASSEMBLE Manual Edit SET UP menu ERR.STP TimingTracking FIX 576/50i 4F Auto 8F Auto 1080/23p, 1080/24p, 1080/25p, 1080/50i4F Force 8F Force 1080/23p, 1080/24p, 1080/25p 1080/50i, 576/50i ∑ Sequence of priority for recording inhibit modes ∑ Edit REC Inhibit mode display≥SOFTWARE ≥HOME ∑ REC ENV display ∑ Selecting the Software inhibit channels ∑ Tracking ≥Automatically adjusting the tracking optimizingOPT Auto Optimizing Not Complete ∑ Manually adjusting the trackingTime Over Turn the Adjust control to select the audio fade time Press the F13 Mode key to set it to X Fade or V Fade∑ Selecting the audio fade time Press the F12 FD Time key INSERT/ASSEMBLE Auto Edit menu Player ∑ Duration ∑ Tape position indicator∑ Entering the edit points ≥Trimming operations Error Invalid TC Data Input the data using the scratchpadSPR Data ≥Calling the edit data which was input last Set the F3 W/PLYR key to OFF ∑ Variable memory functionSet the F4 VAR Memo key to on ∑ Variable memory editing Insert Auto Edit CH Select menu Transfers the VTR to the Insert Auto Edit menu screen INSERT/ASSEMBLE Auto Edit SET UP menu Operation FD TIME2 DLY StrtMODE2 CUT ∑ Setting Edit REC Inhibit ∑ Setting DLY Start∑ Selecting the preroll time SET UP menu Interface SET UP menu Stop BIT Start BITParity User 2ONoteN Both MODE-1 connection diagram ∑ Table of correlations between modes and connectors ∑ Setting the V/A control parameters ∑ Setting the RS-232C parametersBaud Rate AUDIO-1 AUDIO-2 ∑ Setting the CH Assign audio channel This menu is displayed by pressing the following keys SET UP Panel SET UP menu S1 r1 Reverse Panel SET UP OP MAP Remote menu MON SEL MAP ModeFunction Local ∑ OP MAP setting method ∑ Correlation between F5 MAP Mode and F6 Function keys Panel SET UP OP MAP Local menu Remote Regardless of the OP MAP settings, operation of all ≥User files SET UP menu User SET UP menu Factory ∑ Saving user filesEditor Press the F key and F2 Save key together to save the file ∑ Updating user files ∑ Locking user files ∑ Calling user files ∑ Deleting user files ∑ Copying user filenames 140 System SET UP menu For selecting the system frequency FreqFor selecting the video recording format 1080/59.94I 1080/60I HD SDI720/59.94P 720/60P HD Moni SD SDI Main SD SDIREC.GRD PB Auto 144 System format and video output status table Optional System format front setting Transfers the VTR to the RF Engineer SET UP menu screen Engineer SET UP menuTransfers the VTR to the Operation Engineer SET UP Keys are pressed together, and then press Keys are pressed together and then RF Engineer SET UP menu ERR LOG RED Lamp This menu is displayed when the SET UP F13 and F pressed Operation Engineer SET UP menuF9 key is MIN MAX Mecha Test menuFront Servo ∑ Serial number display ∑ Operation Time display∑ UDC board display RF Test menu ENV ErrorEYE Confi Total Error ∑ Error rate displayInner Error ∑ Correction and revision statuses ADJ Mode RF adjustment value display menuADJ CH EQ/REC/PLL CH0, CH1, CH2, CH3 Audio Test menu Mecha Test menu Menu below is displayed when the F5 Key is pressed Mecha Test men Selects the size of the pseudo cassette when no Tape hasNormal Normal operation Size Returns the VTR to the Test menu screen F9-F13 System Test menu Servo Test menu Torque ADJ EnableData Send Measure ∑ Tracking adjustment Keycheck Test Front menu Entire display panel is lighted up in a fixed pattern Test Front Panel menuReturns the VTR to the Test Front menu screen Test Front KEY Check in menu ∑ LEDs ∑ Dial and controls∑ Keys Inserting the IC card Test IC Card menu How to register the date and timePreparations Multcue UserfilErrlog Format ≥User Files Test menu Test IC Card User menu ≥Multi Cue Files Test menu Test IC Card Multi CUE menu Keys are pressed together Test IC Card Multi CUE Select menu F1-F2 F3-F7 Designation of 1-5 cue Number Test IC Card Multi CUE Monitor menuReturns the VTR to the Test IC Card Multi CUE menu F9-F13 Designation of 6-10 cue Number ≥Error Log Files Test IC Card Error LOG menu Returns the VTR to the Test IC Card Error LOG menu Test IC Card Error LOG Monitor menuScreen F9-F13 Diag menu Auto OFF mode Error messagesSystem error Operation error Diag menu error messages Diag Active menu ∑ When there are multiple warningsMenu Masked Menu Last Diag Masked menu ∑ When there are 2 or more canceled masked warningsMenu Active Transfers the VTR to the Diag Active menu Diag Last menu ∑ When 2 or more warnings have occurredLast Clear Message Error description On-screen display Diag error messages SD REF Error HD REF ErrorHD SDI Error CRC Error in HD SDI Sync Error Confirm PCM ErrorCrcc Error Confirm Parity Error Confirm RS-232C Error OVER-RUN ErrorCommand from RS-232C Port SUM-CHECK Error From RS-232C Port Parity Error Auto OFF Cassette Unload Fail Power OFF Auto OFF error messages Servo Error Syscon ErrorMecha Error Sensor Trouble Detection Switch Fail L1 Board not Responding System error messages AV not Responding System ErrorSyscon not Responding Operation messages Message Description of error/problem Operation messages in Auto Edit mode Screen saver function 193 Panasonic Broadcast Europe