Panasonic AJ-HD3700BE, AJ-HD3000, AJ-HD2000, AJ-HD2700 ∑ Changing the superimposing position, Tcg

TC/CHR menu

∑Changing the superimposing position

(1)Move the position using the cursor keys.

Center cursor key

Cursor keys

≥When a cursor key is held down, the cursor will move more quickly.

≥When the center cursor key is pressed, the superimposing re- turns to its initial position.

∑Time code displays and VTR’s operating modes

Display the time codes and VTR’s operating modes as required.

Time code displays

CTL1: Control signal 1	TCG:	Value generated by time code generator
CTL2: Control signal 2	LUBG: Value of LTC user bit generated
LTCR: LTC time code readout value	VUBG: Value of VITC user bit generated
LUBR: LTC user bit readout value	EXTC: External time code value
VTCR: VITC time code readout value	EXUB: External user bit value
VUBR: VITC user bit readout value

≥The colon (“:”) between the seconds and frames denotes the readout mode of the time code reader.

Hours Minutes Seconds Frames

; ; ; ;

<Blinking display: Time code cannot be read out.

[ ]: First field

[. ]: Second field

[: ]: Time code can be read out or TCG value is displayed.

[ ]: Time code cannot be read out.

[. ]: DF mode ON

[: ]: DF mode OFF

This indicates that the time code is the original time code which was recorded on the tape. If the time code displayed is not accompanied by this cassette mark, it means that the time code is the post-conversion time code. (This display will go off when setting the CTL or UB.)

– 77 –