Panasonic AJ-HD3000, AJ-HD2000, AJ-HD2700, AJ-HD3700A, AJ-HD3700BE manual Max, Min

OPERATION ENGINEER SET UP menu

Key	Key designation		Description
F1	EJECT LED	Enables the lighting conditions of the EJECT button’s LED to be
		selected.
		MODE 1: The LED lights during the time starting when the VTR
			is transferred to the eject mode until the cassette is
			ejected or when cassette unloading is completed. (It
			lights during the unloading period and in the EJECT
			mode.)
		MODE 2: The LED lights during the time starting when the VTR
			is transferred to the eject mode until the cassette is
			ejected. (It lights only during the unloading period.)
F2	STILL STEP	ON: When the stop/still mode holding time is set to 5 min with
			the F12 (STILL) key of the HOME SET UP menu and then
			this F2 key to ON, still time can be extended to 30 minutes
			moving the tape back and forth slightly. The tape is moved
			one frame amount every 2 minutes elapsed, and the tape
			movement is stopping within about n2 frames from the
			beginning point of this mode. The VTR is transferred to
			the tape tension release (loosing) mode in order to
			prevent the tape damage after 30 minutes has elapsed.
			Note that the CUE audio is output while the STILL STEP
			mode is activated. This function does not work other than
			5 min in the F12 (STILL) key setting of the HOME SET UP
			menu.
		OFF: STILL STEP does not function.
			When the stop/still mode holding time has elapsed, the
			VTR is transferred to the tape tension release (loosing)
			mode.
F3–F7	——
F8	EXIT	Returns the VTR to the ENGINEER SET UP menu screen.
F9–F11	——
F12	ACCEL	Selects how far to accelerate the reel at a speed under multiple
		speed selected by F13 (KNEE) during a FF or REW operation (in
		the SHTL mode).
		MAX:	Maximum acceleration is applied at all times.
		MIDDLE: Medium acceleration as far as the knee is applied.
			(This is the default value.)
		MIN:	The acceleration as far as the knee is reduced.
		≥When the MAX setting is selected, there is no knee due to the
		maximum acceleration.
		≥There is no knee when an L-size cassette is used.
F13	KNEE	Selects the multiple of the normal speed at which the reel speed
		is to be transferred from the acceleration selected by F12
		(ACCEL) to maximum acceleration during a FF or REW
		operation (in the SHTL mode).
		t8:	8knormal speed
		t15: 15knormal speed
		t20: 20knormal speed
		t30: 30knormal speed

– 150 –