Tc.St, Tc.Ub, Tc.Tc, Err | Panasonic AJ-HD3700, AJ-HD3000, AJ-HD2000

TC/CHR menu

Key	Key designation		Description
F6	CF BIT°1	ON: CF BIT is recoorded.
	For selecting the color	OFF: CF BIT is not recorded.
	frame bit ON/OFF during	≥When [EXT LTC], [S VITC] or [S LTC] is selected in the F1 key,
	recording.	the VTR conforms to the external color frame bit.
F7	——

F8	SETUP	Transfers the VTR to the TC/CHR SET UP menu screen.

F9	CONVERT°2	Transfers the VTR to the TC/CHR CONVERT menu screen.
F10	TCR	LTC: LTC is read out all the time.
	For selecting time code	AUTO: At low speed, VITC is read preferentially. When it is not
	read out mode.		read, then LTC is read.
		VITC: VITC is read out all the time.
		≥In either setting, when the time code cannot be read, values
		corrected by control signal are read out. (Interpolation mode is
		assumed and [INTRP] is displayed on the HOME menu.)

F11	SUPER	TC.ST:	The time code and VTR operating mode are
	For setting superimpose.		superimposed.
		TC.ST.RT: The time code, VTR operating mode and remaining
			tape time are superimposed.
		TC.UB:	The time code and user’s bit are superimposed.
		TC.TC:	The time code is displayed in two steps.
			Both the original time code information and the time
			code information in the format to which it has been
			converted can be displayed at the same time. (Refer
			to the note on the next page.)
		TC:	Only the time code is superimposed.
		OFF:	Nothing is superimposed.

F12	EX SUPER	ERR/FMT: When there are warnings, warning displays appear.
			When there are no warnings, the system format and
			tape format frequencies are displayed.
		ERR:	The warning displays or format information are
			superimposed onto the screen.
		OFF:	The warning displays or format information are not
			superimposed.

F13	CHR TYPE	REVERSE: Characters appear against a black background.
	For selecting type of	INTENSE: Characters are displayed more intensely.
	character to be
	superimosed.

°1This is displayed only when the 480/59.94i or 576/50i system format has been selected.

°2This is displayed only when the 1080/23psf, 1080/23p, 1080/24psf, 1080/24p, 1080/25psf, 1080/25p or 1080/50i system format has been selected.

– 76 –

Image 76

Panasonic AJ-HD3000, AJ-HD2000, AJ-HD2700, AJ-HD3700A, AJ-HD3700BE manual Tc.St, Tc.Ub, Tc.Tc, Err

Contents

Operating Instructions Software Contents Test IC Card Error LOG Menu screen transitions Multi CUE F8 Multi CUE SET UP Assemble Manual Edit S T Turning on the power Turn on the power Home menu is displayed Home menu displays ∑ Display lamps SD Free HD FreeDual ∑ Setting mode display area ∑ Remaining tape time∑ User file display ∑ Time code displays ∑ Setting the initial value for the time code 00 00 00 ∑ Setting and checking the cue time Press the 4 cursor key Cue time now appears in reverse video Home menu This menu is displayed by pressing the following key Home Key Key designation Description ResetHold Free ALL SD SDI SD SDI OUT DigitalAudio Mixer Analog Home SET UP menu This menu is displayed by pressing the following keys Home Field FRAME1Fine Coarse After pressing the F11 key, turn the Adjust control Sets the stop/still still picture mode holding timePreroll Still Press the ENT key. The setting is now entered ∑ ReferenceCenter cursor key Cursor key ∑ Programmed play function Video in menu This menu is displayed by pressing the following key Digital INT SGRamp Black Video OUT HD menu BLACK.L F3 PRConvert Video OUT HD SET UP menu This menu is displayed by pressing the following keys Serial SYS Phase Line ConvInterp OFF Video OUT HD SET UP State menu Eemode ∑ Selecting the TAPE/EE output signals Video OUT SD menu Transfers the VTR to the Video OUT SD SET UP Composite Transfers the VTR to the Video OUT SD SET UP SDI menuCmpst Menu screen Video OUT SD SET UP Composite menu Comb FIL ClipSYS SC SYS H Video OUT SD SET UP Cmpst State menu Through The E-E through mode AV minimum delay modeOr Audio OUT F8 F12 Is established ∑ Selecting the TAPE/EE output signals Video OUT SD SET UP SDI menu FINE/COARSE With the 480/59.94i formatWith the 480/59.94p format With the 576/50i format ALL on Video OUT SET UP Line BLK video output line blanking menuALL OFF ∑ Setting the line blanking Move the cursor and select the lines to be blanked Video OUT SD SET UP SDI State menu Video OUT SET UP State menu Video OUT Convert menu HdtosdSdtohd Hdtohd Video OUT Convert Hdtosd menu Hfilter Enhance 75/1.0/1.25/1.5/2.0/3.0Hfilter Response Vfilter Enhance 0/2.0/3.0/4.0/5.0/6.0 Sets the the picture quality horizontal frequency bandwidth5/1.0/1.5/2.0/3.0/4.0 Sets the the picture quality vertical frequency bandwidth Video OUT Convert Sdtohd menu Controls the enhancement adjustment of the converter output Video OUT Convert Hdtohd menu Audio in menu PCM CUECH-MIX Audio in PCM Input Select menu Digital AnalogAES Selects the signals of the analog CH2 input CH6 Selection is made in line with the CH5 setting usingF10 CH-6 ANA CH2 Audio in CUE Input Select menu Source Mixes the playback signalsNo mixing Audio in SET UP menu This menu is displayed by pressing the following keys Audio Tone ∑ Switching the audio level meter scaleFr in increments of 1/10th of a frame ∑ Operation ∑ Formats supported Audio in CH-MIX Select menu SelectCH-MIX on CH-MIX OFF ∑ Mix-and-record Sound output based on VTR’s mode and F6, F7 key statuses ONotesN Audio OUT menu Monitor SDI Asign Audio OUT Monitor menu Shtl MoniVAR ADD Audio OUT SET UP menu Full Rate CON2 Auto CPY3 F11 Rate CON key ∑ Fade function Audio OUT SET UP State menu Video OUT SET UP State menu Audio OUT SDI Asign menu Sdaud Sdtosd TC/CHR menu EXT LTC LTCVTC Slave TC.ST TC.UBTC.TC ERR Time code displays CTL1 Control signal ∑ Changing the superimposing position∑ Time code displays and VTR’s operating modes TCG ∑ Error information displays COMP.CPU ErrorSystem Error other error VTR’s operating modes ∑ Superimposed displays of format information ∑ Superimposed displaysSYS=23 TAPE=24 30LTCR 01 04 37 24LTCR 01 04 37 Table of user bit settings TC/CHR SET UP menu This menu is displayed by pressing the following keys TC/CHR TCG OUT VITC.LVitc LTC SD mode TC/CHR SET UP VITC.L menuHD mode ∑ Selecting the line where Vitc is to be inserted Tcsync point setting TC/CHR Convert menu∑ 2-level and 3-level time code displays ≥Front panel 24TC 30TC ∑ Concerning the TC Sync value and sync phase settings ∑ Setting the TC Sync valueHD Super LTC OUT OEditing accuracyN OPoints to noteN VAR Limt F10 OFF Ltcout Multi CUE menu Transfers to the Multi CUE SET UP menu screen Protect ∑ Switching the pages ∑ Protecting pages∑ Entering cues Pagef ∑ Clearing cue data ∑ Changing cue points∑ Clearing all the cue points Multi CUE SET UP menu PAG Mode Auto StepPAG CLR ALL CLR INSERT/ASSEMBLE Manual Edit menu INSERT/ASSEMBLEAuto Edit CH Select Insert Manual Edit CH Select menu Video CH1 ON/OFFCH2 ON/OFF CH3 ON/OFF INSERT/ASSEMBLE Manual Edit SET UP menu Keys to display this menu Timing ERR.STPTracking FIX 4F Auto 8F Auto 1080/23p, 1080/24p, 1080/25p, 1080/50i 576/50i4F Force 8F Force 1080/23p, 1080/24p, 1080/25p 1080/50i, 576/50i ∑ Edit REC Inhibit mode display ∑ Sequence of priority for recording inhibit modes≥SOFTWARE ≥HOME ∑ Selecting the Software inhibit channels ∑ REC ENV display ≥Automatically adjusting the tracking optimizing ∑ TrackingOPT Auto Optimizing Not Complete ∑ Manually adjusting the trackingTime Over Press the F13 Mode key to set it to X Fade or V Fade Turn the Adjust control to select the audio fade time∑ Selecting the audio fade time Press the F12 FD Time key INSERT/ASSEMBLE Auto Edit menu Player ∑ Duration ∑ Tape position indicator∑ Entering the edit points ≥Trimming operations Input the data using the scratchpad Error Invalid TC DataSPR Data ≥Calling the edit data which was input last Set the F3 W/PLYR key to OFF ∑ Variable memory functionSet the F4 VAR Memo key to on ∑ Variable memory editing Insert Auto Edit CH Select menu Transfers the VTR to the Insert Auto Edit menu screen INSERT/ASSEMBLE Auto Edit SET UP menu Operation DLY Strt FD TIME2MODE2 CUT ∑ Setting Edit REC Inhibit ∑ Setting DLY Start∑ Selecting the preroll time SET UP menu Interface SET UP menu Start BIT Stop BITParity User Both 2ONoteN ∑ Table of correlations between modes and connectors MODE-1 connection diagram ∑ Setting the V/A control parameters ∑ Setting the RS-232C parametersBaud Rate ∑ Setting the CH Assign audio channel AUDIO-1 AUDIO-2 Panel SET UP menu This menu is displayed by pressing the following keys SET UP Reverse S1 r1 Panel SET UP OP MAP Remote menu MAP Mode MON SELFunction Local ∑ Correlation between F5 MAP Mode and F6 Function keys ∑ OP MAP setting method Panel SET UP OP MAP Local menu Regardless of the OP MAP settings, operation of all Remote User SET UP menu ≥User files SET UP menu ∑ Saving user files FactoryEditor Press the F key and F2 Save key together to save the file ∑ Locking user files ∑ Updating user files ∑ Deleting user files ∑ Calling user files ∑ Copying user filenames System SET UP menu 140 For selecting the system frequency FreqFor selecting the video recording format HD SDI 1080/59.94I 1080/60I720/59.94P 720/60P HD Moni SD SDI SD SDI MainREC.GRD PB Auto 144 Optional System format front setting System format and video output status table Engineer SET UP menu Transfers the VTR to the RF Engineer SET UP menu screenTransfers the VTR to the Operation Engineer SET UP Keys are pressed together, and then press RF Engineer SET UP menu Keys are pressed together and then RED Lamp ERR LOG This menu is displayed when the SET UP F13 and F pressed Operation Engineer SET UP menuF9 key is MAX MIN Test menu MechaFront Servo ∑ Serial number display ∑ Operation Time display∑ UDC board display RF Test menu Error ENVEYE Confi ∑ Error rate display Total ErrorInner Error ∑ Correction and revision statuses RF adjustment value display menu ADJ ModeADJ CH EQ/REC/PLL CH0, CH1, CH2, CH3 Audio Test menu Menu below is displayed when the F5 Key is pressed Mecha Test menu Selects the size of the pseudo cassette when no Tape has Mecha Test menNormal Normal operation Size System Test menu Returns the VTR to the Test menu screen F9-F13 Servo Test menu ADJ Enable TorqueData Send Measure ∑ Tracking adjustment Test Front menu Keycheck Entire display panel is lighted up in a fixed pattern Test Front Panel menuReturns the VTR to the Test Front menu screen Test Front KEY Check in menu ∑ LEDs ∑ Dial and controls∑ Keys Inserting the IC card Test IC Card menu How to register the date and timePreparations Userfil MultcueErrlog Format Test IC Card User menu ≥User Files Test menu Test IC Card Multi CUE menu ≥Multi Cue Files Test menu Test IC Card Multi CUE Select menu Keys are pressed together Test IC Card Multi CUE Monitor menu F1-F2 F3-F7 Designation of 1-5 cue NumberReturns the VTR to the Test IC Card Multi CUE menu F9-F13 Designation of 6-10 cue Number Test IC Card Error LOG menu ≥Error Log Files Returns the VTR to the Test IC Card Error LOG menu Test IC Card Error LOG Monitor menuScreen F9-F13 Error messages Diag menu Auto OFF modeSystem error Operation error Diag menu error messages ∑ When there are multiple warnings Diag Active menuMenu Masked Menu Last ∑ When there are 2 or more canceled masked warnings Diag Masked menuMenu Active Transfers the VTR to the Diag Active menu Diag Last menu ∑ When 2 or more warnings have occurredLast Clear Diag error messages Message Error description On-screen display HD REF Error SD REF ErrorHD SDI Error CRC Error in HD SDI PCM Error Sync Error ConfirmCrcc Error Confirm Parity Error Confirm OVER-RUN Error RS-232C ErrorCommand from RS-232C Port SUM-CHECK Error From RS-232C Port Parity Error Auto OFF error messages Auto OFF Cassette Unload Fail Power OFF Syscon Error Servo ErrorMecha Error Sensor Trouble Detection Switch Fail System error messages L1 Board not Responding System Error AV not RespondingSyscon not Responding Operation messages Operation messages in Auto Edit mode Message Description of error/problem Screen saver function 193 Panasonic Broadcast Europe