Panasonic AJ-HD2000 CPU Tape Handle, Syscon Error, Trouble, CPU Servo SYS Comm, Servo Error, Dew

AUTO OFF error messages

Message	Error description	On-screen display
CPU TAPE HANDLE	The CPU is not working properly due to an error	SYSCON ERROR
TROUBLE	in the interrupt processing, etc.
CPU (SERVO SYS) COMM.	A problem has occurred in communication	SERVO ERROR
TROUBLE	between the servo microcomputer and system
	control microcomputer.
CASSETTE PHOTO	A problem with the LED has been detected.	MECHA ERROR
SENSOR TROUBLE
DETECTION SWITCH FAIL	There is a problem with the cassette’s 3-stage	MECHA ERROR
(A)	switch (A) (on the cylinder side).
DETECTION SWITCH FAIL	There is a problem with the cassette’s 3-stage	MECHA ERROR
(B)	switch (B) (middle position).
DETECTION SWITCH FAIL	There is a problem with the cassette’s 3-stage	MECHA ERROR
(C)	switch (C) (on the cassette insertion slot side).
ROTATE-RANGE OVER	A problem with the cylinder’s rotation has been	SERVO ERROR
	detected.
CAPSTAN NOT ROTATE	A problem with the capstan’s rotation has been	SERVO ERROR
	detected.
TAPE TENSION ERROR	A tape tension error has been detected. (Pinch	SERVO ERROR
	roller ON status) Check the tape transport
	system.
TAPE TENSION OVER-	A tape tension error has been detected. (Reel	SERVO ERROR
RANGE IN SHTL	drive status with pinch roller OFF) Check the
	tape transport system.
REEL DIRECTION	A discrepancy in the rotational directions of the	SERVO ERROR
UNMUTCH	supply and take-up reels has been detected.
	Check the tape transport system.
WIND-UP REEL NOT	Defective rotation of the take-up reel has been	SERVO ERROR
ROTATE	detected. (During capstan drive) Check the tape
	transport system.
NO S-REEL FG PULSE	Trouble with the rotation of the supply reel has	SERVO ERROR
	been detected.
NO T-REEL FG PULSE	Trouble with the rotation of the take-up reel has	SERVO ERROR
	been detected.
CASSETTE UNLOAD FAIL	A problem with the cassette “up” operation has	MECHA ERROR
	occurred. Check the tape transport system.
SUB UNLACING FAIL	A problem with the sub-unloading operation has	MECHA ERROR
	occurred. Check the tape transport system.
MAIN UNLACING FAIL	A problem with the main unloading operation	MECHA ERROR
	has occurred. Check the tape transport system.
DEW	The formation of condensation has been	MECHA ERROR
	detected. Refrain from inserting a cassette since
	this condition may cause the tape to adhere to
	the inside parts, etc., thereby damaging it.

– 187 –