Panasonic AJ-HD3700BE, AJ-HD3000, AJ-HD2000, AJ-HD2700, AJ-HD3700A Timing, Err.Stp, Tracking, Fix

INSERT/ASSEMBLE MANUAL EDIT SET UP menu

Key	Key designation		Description
F1	TIMING°	Sets the timing with which to record the fields at the edit IN point
	For setting the edit timing.	and OUT point. This menu item can be set by pressing the F1
		key and the F key together.
		F1:	Editing starts from the odd-numbered field at the IN
			point, and it ends when an even-numbered field one
			frame before the OUT point is recorded.
		F2:	Editing starts from the even-numbered field at the IN
			point, and it ends when an odd-numbered field at the
			OUT point is recorded.
		F1/F2: The fields for the edit IN point and OUT point are determined
			by the timing at which the edit command is issued.
			If the edit timing command is issued in an even-
			numbered field, editing is ended in an odd-numbered
			field; conversely, if the edit timing command is issued in
			an odd-numbered field, editing is ended in an even-
			numbered field.
		≥The edit timing can also be set on the AUTO EDIT SET UP menu.
		If a different mode has been set on the AUTO EDIT SET UP
		menu, the mode which has been set on the INSERT/ASSEMBLE
		MANUAL EDIT SET UP menu will be changed.
		≥The F1 setting is forcibly established when the CONTROL
		(REMOTE/LOCAL) switch has been set to LOCAL.
F2–F7	——
F8	EXIT	Returns the VTR to the MANUAL EDIT menu screen.
F9	ERR.STP	When the ENV value at which editing started (5 frames before)
	Error stop.	has dropped to 25% below the REC ENV value when optimizing
		was completed, an error is considered to have occurred, and one
		of the following operations is selected.
		ON: During execution of editing in optimize mode, if an error
			has occurred up to the IN point, editing is aborted and the
			stop mode is assumed.
		OFF: Displays a message and continues editing when an error
			has occurred.
F10	TRACKING	Under normal times, tracking adjustment is not necessary.
	For adjusting the tracking.	Adjustment is made if tracking disparities have occurred during editing.
		VAR:	The tracking can be adjusted manually.
			Refer to “Manually adjusting the tracking” (on page 106).
		FIX:	The tracking is fixed.
		OPT. ONCE: At the initial editing after the cassette has been
			inserted, the tracking is optimized while the tape is
			playing back up to the IN point. The tracking is not
			subsequently optimized.
			When the PLAY button and STAND BY button are
			pressed together during EDIT/PLAY, the tracking
			is optimized again, and it is optimized with each
			EDIT/PLAY operation.

OPT. AUTO: The tracking is optimized while the tape is playing back up to the IN point with each editing operation, and it is retained even if the VTR is transferred to another menu.

Refer to “Automatically adjusting the tracking.”

°This item cannot be displayed when the 1080/23p, 1080/24p, 1080/25p or 720/59p format has been selected. (It is forcibly set to F1.)

– 101 –