Panasonic AJ-HD3000 manual Torque, Data Send, Measure, PG Shift, ADJ Rate, Value, Bimorph Init

SERVO TEST menu

Key	Key designation		Description
F1	TORQUE	Key for adjustment by service personnel.
	Reel torque adjustment.
F2	DATA SEND	Key for adjustment by service personnel.
	Torque data forwarding.
F3	MEASURE	Key for adjustment by service personnel.
	(Measure)
F4	AT	Key for adjustment by service personnel.
	AT head adjustment.
F5	METER	ERROR:	Displays inner error level.
		ENV:	Displays envelop level.
F6	PG SHIFT	Key for adjustment by service personnel.
	PG shifter adjustment.
F7	ADJ RATE	Key for adjustment by service personnel.
	Adjust rate.
F8	EXIT	Returns the VTR to the TEST menu screen.
F9	MECHA	Key for adjustment by service personnel.
	Mechanical adjustment.
F10	TRACKING	Under normal conditions, tracking adjustment is not necessary.
	Tracking adjustment.	Adjust if there are tracking discrepancies while editing.
		VAR:	Tracking is adjusted manually. Refer to “Manually
			adjusting the tracking” (page 106).
		FIX:	Tracking is fixed at the center position of the
			manual adjustment.
		OPT. ONCE: Tracking is optimized only once while the tape is
			playing up to the IN point during the first editing
			after the cassette has been inserted. Thereafter,
			optimization does not take place. However,
			optimization can be performed again. Refer to
			“Automatically adjusting the tracking” (page 100).
		OPT. AUTO: Tracking is optimized while the tape is playing up
			to the IN point with each editing. Refer to
			“Automatically adjusting the tracking” (page 105).
F11	X VALUE	Key for X value adjustment by service personnel.
F12	BIMORPH INIT	Key for adjustment by service personnel.
	Removal of hysteresis at
	AT voltage element.
F13	ADJ ENABLE	Key for adjustment by service personnel.

– 162 –