Panasonic AJ-HD2000, AJ-HD3000, AJ-HD2700, AJ-HD3700A, AJ-HD3700BE manual Player

INSERT/ASSEMBLE AUTO EDIT menu

Key Key designation Description

F1	LAST X
	For calling the edit data to
	be input.

When the F1 key is pressed, “LOAD” is displayed, and the edit data which was input last is called.

F2	LAST ED
	For calling all the last data
	edited.

When the F2 key is pressed, “LOAD” is displayed, and all the data which was edited last is called.

F3	W/PLYR	Performs remote control of VTR connected by RS-422A.
	Continuous VTR remote	ON:	Remote control possible.
	control ON/OFF.	OFF:	Unit operated independently.
		≥See also F5 (PLYR SEL) key.
F4	VAR MEMO	This function stores the playback speed and direction settings
	Variable memory.	established by the search dial in its memory and automatically
		reproduces these settings. (At times, these settings are
		reproduced by one’s own VTR; at other times, they may control
		the player that is connected.)
		ON: Enables the variable memory function.
		OFF: Disables the variable memory function.
F5	PLYR SEL	PLYR-1:Controls the VTR connected to REMOTE OUT
	Selects player for remote			connector.
	control.	PLYR-2:Controls the VTR connected to REMOTE IN/OUT
				connector.
F6	R/P SEL	PLAYER:		Performs remote control of the player selected by
	Selects VTR for operation.			F5 (PLYR SEL) key.
		RECORDER: Control is the main unit (recorder) only.
F7	TRIM	ON: Registered edit points are corrected by frame unit.
	Frame correction of edit	OFF:	Releases trim function.
	point.
F8	SET UP	Transfers the VTR to the AUTO EDIT SET UP menu screen.
F9	INSERT	ON: Sets the editing mode ON.
	For setting the editing	OFF: Sets the editing mode OFF.
	mode ON/OFF.
F10	SPLIT	This function registers each audio and video edit point during
	Split editing ON/OFF.	insert editing.
		ON:	Enables split editing.
		OFF: Releases split editing.
		(For details, refer to pages 41 and 42 in the Hardware Operating
		Instructions.)
F11	——
F12	MANUAL EDIT	Transfers the VTR to the MANUAL EDIT menu screen.
F13	CH SELECT	Transfers the VTR to the INSERT AUTO EDIT CH SELECT
	Edit channel selection.	(editing channel selection) menu screen (but only for insert
		editing).

– 109 –