Panasonic AJ-HD3700A, AJ-HD3000 Wrong Optimized, Tracking Value, Servo Unlocked, Before in Point

DIAG error messages

Message	Error description	On-screen display
WRONG OPTIMIZED	The tracking optimizing operation resulted in a	OPT ERROR
TRACKING VALUE	drop in the maximum envelope level by over
	25%. Check the tape playback mode.
SERVO UNLOCKED	The servo was disengaged (unlocked) before an	OPT ERROR
BEFORE IN POINT	edit IN point.
NO EXTERNAL HD REF	The REF signal is not supplied to the HD REF	HD REF ERROR
	input connector.
NO EXTERNAL SD REF	The REF signal is not supplied to the SD REF	SD REF ERROR
	input connector.
NO COLOR BURST IN SD	There is no burst signal in the SD REF signal.	SD REF ERROR
REF
NO STANDARD	A problem has occurred in SCH of the SD REF	SD REF ERROR
SCH-RANGE IN REF	signal.
NO HD SDI INPUT	There is no HD SDI input.	HD SDI ERROR
CRC ERROR IN HD SDI	A CRC error has been detected from the HD	HD SDI ERROR
INPUT	SDI input signal.
NO EMBEDDED AUDIO	Audio signals are not detected in the HD SDI	HD SDI ERROR
(CH1/2/3/4) INPUT	input signal.
NO EMBEDDED AUDIO	Audio signals are not detected in the HD SDI	HD SDI ERROR
(CH5/6/7/8) INPUT	input signal.
AUDIO (CH1/2/3/4) DATA	A transmission error was detected in the audio	HD SDI ERROR
ERROR IN HD SDI INPUT	signals of the HD SDI input signal.
AUDIO (CH5/6/7/8) DATA	A transmission error was detected in the audio	HD SDI ERROR
ERROR IN HD SDI INPUT	signals of the HD SDI input signal.
NO EMBEDDED LTC	The LTC signal is not detected in the HD SDI	HD SDI ERROR
	input signal.
LTC ERROR IN HD SDI	A transmission error was detected in the LTC	HD SDI ERROR
INPUT	signal of the HD SDI input signal.
NO EMBEDDED VITC	The VITC signal is not detected in the HD SDI	HD SDI ERROR
	input signal.
VITC ERROR IN HD SDI	A transmission error was detected in the VITC	HD SDI ERROR
INPUT	signal of the HD SDI input signal.
NO SD SDI INPUT	There is no SD SDI input.	SD SDI ERROR
NO EMBEDDED AUDIO	Audio signals are not detected in the SD SDI	SD SDI ERROR
(CH1/2/3/4) INPUT	input signal.
NO EMBEDDED AUDIO	Audio signals are not detected in the SD SDI	SD SDI ERROR
(CH5/6/7/8) INPUT	input signal.
UNMATCH AUDIO	Check the C hole (for identifying the 4-channel/	FRMT UNMATCH
RECORDED FORMAT	8-channel format) on the cassette. The C hole
CHECK CASSETTE C BIT	information and 4- or 8-channel format
	information recorded on the tape do not match.
	(When PB.AUTOlON)
UNMATCH AUDIO	Check the VTR system format. The 4- or	FRMT UNMATCH
RECORDED FORMAT	8-channel format information recorded on the
CHECK SYSTEM FORMAT	tape and the 4 or 8 channels set for the VTR
	system do not match. (When PB.AUTOlOFF)

– 183 –