Panasonic AJ-HD3700BE manual OVER-RUN Error, From RS-422 Port RS-422 Communication, RS-232C Error

DIAG error messages

Message	Error description	On-screen display
OVER-RUN ERROR IN	An overrun error has occurred in the received	RS-422 ERROR
RECEIVED COMMAND	command.
FROM RS-422 PORT
RS-422 COMMUNICATION	A timeout error has occurred.	RS-422 ERROR
STOP BY TIME OUT
RECEIVED INVALID	An undefined command has been received.	RS-232C ERROR
COMMAND FROM RS-232C
PORT
SUM-CHECK ERROR IN	A sum check error has occurred in the received	RS-232C ERROR
RECEIVED COMMAND	command.
FROM RS-232C PORT
PARITY ERROR IN	A parity error has occurred in the received	RS-232C ERROR
RECEIVED COMMAND	command.
FROM RS-232C PORT
FRAMING ERROR IN	A framing error has occurred in the received	RS-232C ERROR
RECEIVED COMMAND	command.
FROM RS-232C PORT
OVER-RUN ERROR IN	An overrun error has occurred in the received	RS-232C ERROR
RECEIVED COMMAND	command.
FROM RS-232C PORT
RS-232C COMMUNICATION	A timeout error has occurred.	RS-232C ERROR
STOP BY TIME OUT
RECEIVED INVALID	An undefined command has been received.	VA-CONT ERROR
COMMAND FROM
VA_CONT PORT
SUM-CHECK ERROR IN	A sum check error has occurred in the received	VA-CONT ERROR
RECEIVED COMMAND	command.
FROM VA_CONT PORT
PARITY ERROR IN	A parity error has occurred in the received	VA-CONT ERROR
RECEIVED COMMAND	command.
FROM VA_CONT PORT
FRAMING ERROR IN	A framing error has occurred in the received	VA-CONT ERROR
RECEIVED COMMAND	command.
FROM VA_CONT PORT
OVER-RUN ERROR IN	An overrun error has occurred in the received	VA-CONT ERROR
RECEIVED COMMAND	command.
FROM VA_CONT PORT
EXT LTC NOT READ	There is a problem with the EXT TC input.	TC ERROR
EXT VITC NOT READ	There is a problem with the EXT VITC input.	TC ERROR
LTC IN TAPE NOT READ	The LTC signal is not played back.	TC ERROR
IC CARD LOW BATTERY	The IC card battery has a low remaining charge.	CARD LOW BATT
	Replace the card.

– 185 –