Panasonic AJ-HD3000, AJ-HD2000, AJ-HD2700, AJ-HD3700A, AJ-HD3700BE manual Both, 2ONoteN

INTERFACE SET UP menu

Key	Key designation		Description
F7	PREREAD°1	The setting can be changed by pressing the F7 key while holding
	For setting pre-read from	down the F key.
	the remote commands.	VIDEO: Video pre-read can be set.
		AUDIO: Audio pre-read can be set.
		V&A:	Both video and audio pre-read can be set.
F8	EXIT	Returns the VTR to the SET UP menu screen.
F9	UB PRESET	Selects the setting destination for the TCG UB preset command
	For setting the UB preset	supplied from the external source (RS-422/232C).
	from remote.	L&V: Sets the destination for LTC UB and VITC UB.
		LTC: Sets the destination for LTC UB only.
		VITC: Sets the destination for VITC UB only.
F10	VAR LIMT°2	Selects the limit speed for the VAR command supplied from the
		external source (RS-422/232C).
		This item can be set by pressing the F10 key and F key together.
		ON: The tape speed is limited to the range from j1x to i2x
		normal speed.
		OFF: The tape speed is limited to the range from j1.5x to
		i2.5x normal speed. (At speed above 2x or so or below
		j1x, pictures are searched without AT ON TRACK.)
F11	V. LEV. CNT	Selects whether to vary the VTR HD/SD output in response to an
		external video component adjustment command (RS-422, V/A
		controller).
		NORMAL: Identifies HD/SD commands and varies the level of
			each.
		HD:	Varies HD output level forcibly.
		SD:	Varies SD output level forcibly.
		BOTH:	Varies This is varied in tandem with the HD
			output/SD output level.
F12–F13	——

°1 This item appears only when an SD format (525/59i or 625/50i) is used as the system format.

°2ONoteN

°2Set this item to OFF for slow editing with the unit connected to an editing controller (such as the BVE-9100). Phase synchronization may not be possible with slow editing near the j1t or i2t speed.

– 124 –