Panasonic AJ-HD3000, AJ-HD2000, AJ-HD2700, AJ-HD3700A, AJ-HD3700BE manual Tcg Out, Vitc.L, Ltc

TC/CHR SET UP menu

Key	Key designation	Description
F1–F6
F7	TCG OUT	For selecting whether to latch the TCG display and LTC output
		using the INPUT CHECK key°.
		MOMNT: Establishes the INPUT CHECK mode only while the
		key is held down.
		LATCH: The INPUT CHECK mode is established when the
		INPUT CHECK key is pressed, and it is held even
		when the key is released. The mode is released in a
		mode other than the EJECT, STBY ON/OFF or STOP
		mode or when the F1 (OUTPUT) key on the HOME
		menu is pressed.
F8	EXIT	Returns the VTR to the TC/CHR menu screen.
F9	VITC.L	For transferring to the VITC LINE selection menu.
		SD mode: The recording VITC superimposing
		and the lines in which it is
			NTSC: 10 – 20 lines
		superimposed are set. The
			(Default 14, 15)
		playback VITC superimposing and	PAL: 8 – 22 lines
		the lines in which it is	(Default 11, 13)
		superimposed are set.
		HD mode: The DOWN CON SD output VITC superimposing
		and the lines in which it is superimposed are set.
F10	VITC	For selecting whether the VITC information is to be
	For superimposing VITC	superimposed on SD recording and output.
	onto the SD output.	ON: VITC is superimposed.
		OFF: VITC is not superimposed.
F11	——
F12	VITC	For selecting whether the VITC information is to be carried on
	For selecting the VITC.	the HD SDI output.
		Selects whether the VITC is to be carried.
		ON: VITC is carried.
		OFF: VITC is not carried.
F13	LTC	For selecting whether the LTC information is to be carried on the
	For selecting the LTC.	HD SDI output.
		Selects whether the LTC is to be carried.
		ON: LTC is carried.
		OFF: LTC is not carried.

°The video input signals can be checked at the SD SDI MONITOR OUT or HD SDI MONITOR OUT connector, and the audio input signals can be checked at the MONITOR connector and HEADPHONES jack; these signals are switched to the input signals while the INPUT CHECK key is held down.

– 82 –