Panasonic AJ-HD3700BE manual ∑ Error rate display, ∑ Correction and revision statuses, Total Error

RF TEST menu

∑Error rate display

The error rates (error occurrence rates) are indicated on the 1) TOTAL ERROR and 2) INNER ERROR displays.

TOTALERROR

INNERERROR

VIDEO&AUDIO

5

5

4

4

3

3

2

2

1

1

VIDEO

AUDIO

A

B

A

B

A

B

A

B

OUTER

CH1

CH0

CH1

CH2

CH3

5

4

3

2

1

1)TOTAL ERROR

During recording, the error rate of the simultaneous playback signals is displayed. During playback, the error rate of the play- back signals is displayed. The audio channels are switched using the center cursor key.

2)INNER ERROR

The error rates after the inner errors have been corrected are displayed for the 8 heads.

Proceed as follows to switch between VIDEO & AUDIO and

AUDIO.

1.Press the center cursor key to display the cursor.

2.Press the F key and cursor key (2 or 1) together to move the cursor to INNER ERROR.

3.Press the center cursor key to select VIDEO & AUDIO or

AUDIO.

4.Press the ENT key to enter the selection.

∑Correction and revision statuses

≥Press the F key and cursor key together to move the highlighted portion from the error rate display described above.

≥By aligning the cursor with CONCEAL V or A, with OUTER V or A, or with INNER and then pressing the center cursor key, it is possible to switch between ON and OFF.

≥These settings are forcibly set to ON when the test menu is exited. Do NOT turn them OFF since doing so will cause noise to be generated in the playback picture and sound.

– 155 –