Using an NP-1 type battery pack

CAUTION:

These servicing instructions are for use by qualified service personnel only. To reduce the risk of fire or electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

1 Remove the battery holder.

2 Mount the NP-1 type battery case on the unit.

1Tighten the mounting screws.

2Tighten the power contact screws.

3Insert the upper part of the removed cover in the

direction of the arrow.

4Align the holes in the bottom part (metal part) of the cover with the holes in the case, and secure the cover with the screw.

When using a V-mount type battery pack

Mount the V-mount adapter plate (optional).

Fit the plate, sliding it in the manner shown in the illustration.

Preparation

Note

When mounting the battery holder, take care not to pinch the connection cord.

a

a.Battery case (for NP-1 type)

3 Setting the battery type.

Select the battery type listed under BATTERY SELECT. Select BATTERY SELECT from the <BATTERY/ P2CARD> screen on the MAIN OPERATION page. When using another battery which cannot be selected using the BATTERY SELECT item setting, select “TYPE A” or “TYPE B”, and set the items that correspond to the characteristics of the battery.

Please refer to [BATTERY SETTING2] (page 191) for more information.

Note

For information about the V-mount adapter plate, please contact the store where you purchased the unit.

Preparation: Power Supply 109