Shot Mark
A shot mark can be added to a clip thumbnail to distinguish this clip from the others.
1 Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2 Use the cursor buttons to move the pointer over the clip to which you want to attach a shot mark.
3
4
Press the SHOT MARKER button.
A shot mark will be attached to the clip thumbnail under the pointer.
To delete a shot mark, reposition the pointer over the clip and press the SHOT MARKER button.
a
Notes
A shot mark can be attached during recording. Please | a. SHOT MARKER button |
refer to [Shot Mark Function] (page 45) for more |
|
information. |
|
When adding a shot mark to (or deleting the shot mark |
|
from) a clip recorded across multiple P2 cards, do this with |
|
all these P2 cards inserted into P2 card slots. |
|
Text Memo
During recording or playback, you can add text memos to clips. Text memos can be used to play back clips at some point or break clips into chunks and copy the necessary portions.
Adding a text memo
Text memos can be added in one of the following ways.
Press the TEXT MEMO button during recording or playback of a clip. A text memo is added to the position where the button is pressed.
Press the TEXT MEMO button when the thumbnail screen is displayed. A text memo is added to the beginning of the clip.
Note
One clip can have up to 100 text and voice memos in combination. Note that the unit is not capable of adding or showing voice memos.
a 
a. TEXT MEMO button
126 Manipulating Clips with Thumbnails: Shot Mark