Audio (input) Function Section

1

1.MIC IN (microphone input) jack (XLR, 5-pin)

A microphone (optional) is connected here. Power can be supplied via this jack to allow use of a phantom microphone. Note that the FRONT MIC POWER menu option must be set to “ON” when using a phantom microphone.

These options are found in the <MIC/AUDIO2> screen on the MAIN OPERATION page.

2.AUDIO LEVEL CH1/CH2 (audio channel 1 & 2 recording level adjustment) controls

With the 3. AUDIO SELECT CH1/CH2 switch positioned to [MAN], these controls can be used to adjust the recording levels for audio channels 1 and 2.

Note that the controls are designed to be locked. For adjustment, each control must be depressed while turning.

3.AUDIO SELECT CH1/CH2 (audio channel 1 & 2 automatic/manual level adjustment selector) switch

Use this switch to select recording level control mode for audio channels 1 and 2.

AUTO: Recording level automatically controlled.

MAN: Recording level manually controlled.

4.AUDIO IN (audio input selector) switch

Use this switch to select the signals recorded through audio channels 1 - 4.

FRONT: Signal from the microphone connected to the

1.MIC IN jack is recorded.

W.L. (WIRELESS):

Signal from the slot-in wireless receiver is recorded.

REAR: Signal from the audio device connected to the

5.AUDIO IN CH1/CH2 connector is recorded.

Note

When you use stereo microphone (AJ-MC900G, optional), set both CH1 and CH2 to [FRONT]. The signal from L CH is recorded to CH1 and that from R CH to CH2.

16

Parts and their Functions: Audio (input) Function Section

12 11

13 14 10 3 7

2

6

8

15

4

5

9

5.AUDIO IN CH1/CH2 (audio input channel 1 & 2) connectors (XLR, 3-pin)

Audio devices or a microphone may be connected here.

6.LINE/MIC/+48V (line input/mic input/mic input +48 V) selector switch

Used to select the audio signal input from the 5. AUDIO IN CH1/CH2 connectors.

LINE: Audio signal line-input from the audio device is input.

MIC: Audio signal from a self-powered (active) microphone is input. (Power for a phantom microphone is not supplied to the microphone from the unit.)

+48V: Audio signal from a passive microphone is input. (Power for a phantom microphone is supplied to the microphone from the unit.)

7.Wireless slot

A Unislot wireless receiver (optional) may be attached here.

8.FRONT AUDIO LEVEL (audio recording level adjustment) control

This control adjusts the recording levels for audio channels 1 and 2.

However, when the 3. AUDIO SELECT CH1/CH2 switch is set to [AUTO], the level will adjust automatically and the 2. AUDIO LEVEL CH1/CH2 knob and this knob will not be active.

The control can be enabled or disabled through the menu options FRONT VR CH1 or FRONT VR CH2. These options can be found in the <MIC/AUDIO1> screen on the MAIN OPERATION page.