6 Turn the jog dial button until a desired character appears.
The characters that appear are switched in the following order:
Space: | |
Ð |
|
Alphabetical characters: | A to Z |
Ð |
|
Numerals: | 0 to 9 |
Ð |
|
Symbols: | ', >, <, /, - |
7
8 Turn the jog dial button to move the arrow (cursor) to the next digit (clockwise), and repeat steps 6 - 7 to set characters (up to 8 characters).
To write data on a selected file
9 When the title is set, turn the jog dial button to move the arrow (cursor) to : .
The data will not be written if any of the following messages appears when the jog dial button is pressed:
Error message | Remedy |
WRITE NG | Insert an SD memory card. |
NO CARD |
|
(No SD memory card inserted.) |
|
|
|
WRITE NG | The card has not been |
FORMAT ERROR | formatted using the unit. |
(SD memory card not properly | Replace the card. |
formatted.) |
|
|
|
WRITE NG | The card may be defective. |
ERROR | Replace the card. |
(SD memory card not writable.) |
|
|
|
WRITE NG | Remove the card and disable |
WRITE PROTECT | the protect. |
(SD memory card write- |
|
protected.) |
|
|
|
WRITE NG | It is impossible to access the SD |
CANNOT ACCESS | memory card while the card is in |
(SD memory card not | use. After completion of the |
accessible.) | respective operations, perform |
| the write operation again. |
|
|
WRITE NG | The card is not writable because |
CARD FULL | it has no free space. Delete |
(SD memory card has no free | unwanted files or replace the |
space.) | card with a new one. |
|
|
13 Turn the jog dial button to move the arrow (cursor) to YES. Then, press the dial button.
When the data has been written, the following message appears:
10 Press the jog dial button to return the arrow (cursor) to the option TITLE.
11
12 Press the jog dial button to display the following message:
14 To exit the menu, press the MENU button.
The settings menu disappears and the status of the unit is indicated at the top and bottom of the viewfinder screen.
Notes
The <SD CARD R/W SELECT> screen can be used to select the type of the menu to be written on the SD memory card.
It is possible to overwrite a setup file stored by a different device with a new setup file from this unit. Note that if the file is overwritten, the original setup file from the other device will be lost.
We recommend managing the respective SD memory cards on the respective devices independently.
92 | Adjustments and Settings for Recording: Handling data |