Panasonic AJ-HPX2700G, AJ-P2C016RG, AJ-P2C002SG, AJ-P2C004HG Selection of video output signals, Settings of signals output from HD SDI A · B connector

Selection of video output signals

The unit employs the HD SDI A · B connector and the MON OUT connector as connectors for outputting video signals.

Settings of signals output from HD SDI A · B connector

Change the characters of the signal output from the HD SDI A · B connector using the <OUTPUT SEL> screen from the menu. The character content output from the HD SDI A · B connector and MON OUT is the same.

The signals output from the HD SDI A · B connector are switched with the HD SDI A · B switch.

However, the switching operation is not acknowledged during the recording operation.

MEM: During EE, such as recording, video images taken by the camera are output. Meanwhile, signals on the P2 card are output during playback.

CAM: The camera images are output at all times.

OFF: No signal is output from the HD SDI A · B connector.

a

HD SDI A・B			TCG
		MEM		F-RUN
		CAM		SET
		OFF		R-RUN
	MON OUT
CHARACTER OUTPUT SEL
		ON		MEM
		OFF		CAM
				OFF

a. HD SDI A · B switch

Item	Variable		Remarks
	range
OUTPUT	MENU	Set the characters to be superimposed
ITEM	ONLY	on the output signals from the HD SDI A
	TC	· B connector and MON OUT connector.
	STATUS	MENU ONLY:
			The menu screen is
			superimposed only when the
			menu is accessed. This normally
		TC:	displays nothing.
			Time codes are superimposed.
			(When the menu is accessed,
			the menu screen is
			superimposed.)
		STATUS:
			The characters that are the
			same as the characters
			superimposed in the viewfinder
			screen are superimposed.
			(When the menu is accessed,
			the menu screen is
			superimposed.)
HD SDI A ·	OFF	ON:	The characters are
B CHAR	ON		superimposed on the HD SDI A ·
		OFF:	B connector.
			The characters are not
			superimposed on the HD SDI A ·
			B connector.

Recording for Settings and Adjustments

Adjustments and Settings for Recording: Selection of video output signals 87