Handling SD memory cards
An SD memory card may be inserted or removed, either before or after the power is turned on.
To insert an SD memory card
Open the lid of the switch cover, and insert an SD memory card (optional) into the SD memory card slot with the notch upward. Close the lid.
To remove the SD memory card
Open the lid of the switch cover, and ensure that the busy lamp is not illuminated. Then, further depress the SD memory card towards the main unit. This releases the SD memory card from the insertion slot. Take hold of the SD memory card and remove it. Close the lid.
When using or storing SD memory cards, be sure to Avoid high temperature and humid environments Avoid water
Avoid static electricity
For storage, the SD memory card must be kept inserted into the unit with the lid closed.
Note
An SD memory card must be inserted with the right side facing the slot. If the card is hard to insert, it may be reversed or upside down. Do not force it into the slot. Check the card before
SD memory card operations
To format an SD memory card, write settings data or read
data on an SD memory card, navigate the menu to the <SD To format an SD memory card CARD READ/WRITE> screen from the FILE page.
Insertion of an SD memory card formatted to a standard other than the SD and SDHC standards using some other device will result in the display of “FORMAT ERROR” on the top right part of the window. In this case, reformat the card as follows.
Note that the indication “FORMAT ERROR” does not disappear if the SD memory card is replaced with this menu page open. When the SD memory card is replaced, perform
TITLE READ.
Note
SD memory cards may be formatted via the thumbnail screen. For more information, see [Formatting SD memory cards] (page 135).
1 Navigate the menu to the <SD CARD READ/WRITE> screen.
2 Turn the jog dial button to move the arrow (cursor) to the menu option CARD CONFIG.
3 Press the jog dial button to display the following message:
90 | Adjustments and Settings for Recording: Handling data |