CHARA ON button

This button is used to select whether to superimpose characters on the video signal output to the MON OUT connector of this unit. Note that the MON OUT CHARACTER switch of this unit does not function when the AJ-RC10G is connected.

Scene file

Scene files created on other types of device cannot be read. When an attempt is made to read such a file, AJ- RC10G displays “NG” on the liquid crystal screen.

Menu option

GAMMA menu

The options available in GAMMA-MODE-SEL are as follows.

HD, SD, F-LIKE1, F-LIKE2, F-LIKE3, FILM REC,

VIDEO REC

DYMC-LVL and BSR-LVL are added to the 4th layer. The variable ranges for these are as follows. DYMC-LVL: 200% - 600%

BSR-LVL: 00% - 30%

Note, however, that these values can only be changed when “FILM REC” has been selected in GAMMA- MODE-SEL.

V-KNSLP and V-KNPNT are added to the 5th layer. The variable ranges for these are as follows. V-KNSLP: 150% - 600%

V-KNPNT: 30% - 107%

Note, however, that these values can only be changed when “VIDEO REC” has been selected in GAMMA- MODE-SEL.

WHITE menu

The variable range of COLR-TEMP-PRE, TEMP-A and TEMP-B is 2300K - 9900K.

KNEE menu

CHROMA LEVEL is added to the 5th layer.

The variable range for this is OFF/–99% - +40%. HI-COLOR LVL is added to the 6th layer.

The variable range for this is 1 - 32.

SHUTTER menu

“S.S2” can be selected in MODE.

The variable range for this is 1/1.0 - 1/250.0. The values which can be selected in SPED differ depending on the settings of this unit.

When “FIX” has been selected in MODE, the options available in SPED are as follows.

1/50, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, HALF, 180.0d, 172.8d, 144.0d, 120.0d, 90.0d, 45.0d

The values that can be selected in SPED differ depending on the settings of the SYSTEM MODE menu option in this unit.

SYNCRO SCAN DISP is added to the 2nd layer. When “S.S” has been selected in MODE, it is possible to select between SEC and DEG as units for the values displayed in SPED. The changes to the units are reflected in this unit.

When “S.S” has been selected in MODE, the variable ranges of SPED are as follows.

For SEC: 1/1.0 - 1/7200 (selectable values differ depending on the settings of this unit)

For DEG: 3.0d - 350.0d

SKIN DTL menu

The options available in OUTPUT are as follows.

MONI, SDI AB

A zebra is added to the colors of the table selected in SDTL.

SCORG of the 3rd layer changes to SKIN DTL EFFECT. The variable range for this is 0 - 31.

FUNC menu

The options available in SELECT of the 4th layer are as follows.

INH, I.OVR, S.BLK, B.GAMMA, Y GET, DRS,

ASSIST, C.TEMP, FRATE, VFR, VF GAM, AUDIO CH1, AUDIO CH2, REC SW, RET SW, PRE REC,

SLOT SEL, PC MODE

Note, however, that the C.TEMP function will not work when assigned to a user button on AJ-RC10G.

The variable range of BLK-GAMMA of the 5th layer is –8 - 8.

RANGE is added next to BLK-GAMMA of the 5th layer. The variable range for this is 1 - 3. FRAME-RATE is added to the 6th layer.

The variable range for this is 1 - 60. Note, however, that the variable range will differ depending on the settings of this unit.

Attaching the Front Audio Level Control Knob

If you use the FRONT AUDIO LEVEL control frequently, attach the accessory knob so that it can be easily operated.

a

c

d

b

e

 

Remove the screw in the center of the FRONT AUDIO LEVEL control, and attach the accessory knob (included) using the screw (included). When attaching the knob, be sure to align the marks on the control with the marks on the knob.

a. FRONT AUDIO LEVEL control

b.Screw

c.Marks

d.Knob (included)

e.Screw (included)

118 Preparation: Attaching the Front Audio Level Control Knob