11. P2 Card Error
| If the error occurs during recording, | |
| “00:00:00:11” appears in the time code | |
Display window | display field. The indication continues to | |
flash after recording is stopped and until | ||
indication | ||
the next operation is performed. There is | ||
| ||
| no indication if the error occurs during | |
| playback. | |
|
| |
| If the error occurs during recording, the | |
WARNING lamp | lamp flashes 4 times per second for a | |
period of about 3 seconds after recording | ||
| stops. The lamp does not light if the error | |
| occurs during playback. | |
|
| |
| If the error occurs during recording, the | |
Tally lamp | lamp flashes 4 times per second for a | |
period of about 3 seconds after recording | ||
| stops. The lamp does not light if the error | |
| occurs during playback. | |
|
| |
| A flashing “CARD ERR ” appears. In | |
Viewfinder | the actual indication the is replaced by | |
the slot number of the P2 card that | ||
| ||
| triggered the error. | |
|
| |
| If the error occurs during recording, the | |
Warning tone | tone sounds 4 times per second for a | |
period of about 3 seconds after recording | ||
| stops. The tone does not sound if the | |
| error occurs during playback. | |
|
| |
Warning description | An error has occurred while recording | |
data to or playing data from a P2 card. | ||
| ||
|
| |
Recording/playback | Stop recording or playback. | |
operation | ||
| ||
Countermeasures | Replace the affected P2 card. | |
|
|
12. FAN STOP
Display window | No display. | |
indication | ||
| ||
|
| |
WARNING lamp | Blinks 4 times per second. | |
|
| |
Tally lamp | No display. | |
|
| |
Viewfinder | The “FAN STOP” indicator blinks while | |
recording continues. | ||
| ||
|
| |
Warning tone | It does not sound. | |
|
| |
Warning description | The fan is at rest because something is | |
wrong with it. | ||
| ||
|
| |
| The unit continues to operate. However, | |
Recording/playback | when the unit operates with the fan | |
stopped, then the temperature inside | ||
operation | rises. While the unit continues to operate, | |
| clips may not be recorded or played back | |
| properly. | |
|
| |
Countermeasures | Immediately stop using the unit and | |
consult your distributor. | ||
| ||
|
|
13. PROXY CARD ERROR
Display window | No display. | |
indication | ||
| ||
|
| |
WARNING lamp | Flashes 4 times per second for a period | |
of about 3 seconds. | ||
| ||
|
| |
Tally lamp | Flashes 4 times per second for a period | |
of about 5 seconds. | ||
| ||
|
| |
Viewfinder | The “PROXY CARD ERROR” indicator | |
light up. | ||
| ||
|
| |
Warning tone | It does not sound. | |
|
| |
Warning description | Proxy recording stops because of failure | |
on either the video encoder card or the | ||
| stream. | |
|
| |
Recording/playback | The unit continues to operate. | |
operation | ||
| ||
Countermeasures | Check the video encoder card or avoid | |
use of proxy recording. | ||
| ||
|
|
Inspections and Maintenance
Maintenance and Inspections: Warning System 157