Manuals / Brands / Photography / Camcorder / Panasonic / Photography / Camcorder

Panasonic AJ-HPX2700G, AJ-P2C016RG, AJ-P2C002SG, AJ-P2C004HG manual 204

1 206

Download 206 pages, 23.67 Mb

Input/output Unit

GENLOCK IN:
BNC	1, 1.0 VP-P, 75 Ω
(This is available as the return video input connector.)
MON OUT:
BNC	1
(It can be switched among HD SDI/VBS.)
HD SDI:		0.8 VP-P, 75 Ω
		(Compliant with the SMPTE292M/
		296M standards)
VBS:		1.0 VP-P, 75 Ω
HD SDI A:	1, 0.8 VP-P, 75 Ω
BNC	1, 0.8 VP-P, 75 Ω
(Compliant with the SMPTE292M/296M standards)
HD SDI B:	1, 0.8 VP-P, 75 Ω
BNC	1, 0.8 VP-P, 75 Ω
(Compliant with the SMPTE292M/296M standards)
TC IN:	1, 0.5 VP-Pto 8 VP-P, 10 kΩ
BNC	1, 0.5 VP-Pto 8 VP-P, 10 kΩ
TC OUT:	1, low impedance, 2.0±0.5 VP-P
BNC	1, low impedance, 2.0±0.5 VP-P
DVCPRO:
6 pins (output)

Transmission rate:

400 Mbps, 200 Mbps, or 100 Mbps (selectable)

Transmission data:

Compliant with IEEE1394-1995/ 1394a-2000, IEC61883-1 and 2, and SMPTE 396M

Control commands:

Compliant with the AV/C Command Set standards.

AUDIO IN CH1/CH2:
XLR	2, 3 pins
LINE, MIC, and +48 V switch-selectable
LINE:		+4 dBu
		(–3 dBu/0 dBu/+4 dBu selectable
		with menu)
MIC:		–60 dBu (–60 dBu/–50 dBu
		selectable with menu)
MIC +48 V:		Compatible with +48 V phantom
		power supply
		–60 dBu (–60 dBu/–50 dBu
MIC IN:		selectable with menu)
MIC IN:
XLR	1, 5 pins

+48 V phantom (on/off selectable with menu) –40 dBu (–50 dBu/–40 dBu selectable with menu)

WIRELESS IN:

25pin, D-SUB, –40 dBu Dual Channel supported

AUDIO OUT CH1/CH2:

XLR 1, 5 pins, +4 dBu

(–3 dBu/0 dBu/+4 dBu selectable with menu) Balanced low-impedance output

Headphones:

Stereo mini jack 2

DC IN:

XLR 1, 4 pins, DC 12 V (DC 11 V to 17 V)

DC OUT:

4 pins, DC 12 V (DC 11 V to 17 V) Maximum rated current: 1.5 A

LENS:

12 pins

EVF:

20pins

REMOTE:

10pins (connector for AJ-RC10G)

GPS:

6pins (connector for AJ-GPS910G) USB 2.0 (HOST):

Type-A connector, 4-pin, in accordance with USB Ver. 2.0

USB 2.0 (DEVICE):

Type-B connector, 4-pin, in accordance with USB Ver. 2.0

Accessories

Shoulder Strap

Front Audio Level control knob

Control knob mounting screw 1

CD-ROM

Weight and dimensions when shown are approximately. Specifications are subject to change without notice.

204 Specifications

Contents

Operating Instructions Memory Card Camera-Recorder Read this first PLEASE NOTE: What to remember when throwing memory cards away or transferring them to others Contents Adjustments and Settings for Recording Preparation Manipulating Clips with Thumbnails Connection with external device Maintenance and Inspections Menu Updating the firmware incorporated into the unit General Features of Camera unit Features of Recorder/Player unit Text memos & Shot marks Front-mountedSound Level Control Mechanism Support for Built-inUnislot Wireless Receive Recording Review Capability Built-inTime Code Generator/reader Features of the Input/Output unit Other features Dimensions drawing Color TV Standard Settings (Settings for frame frequency) System Configuration Parts and their Functions Power Supply and Accessory Mounting Section Audio (input) Function Section Audio (output) Function Section Shooting and Recording/Playback Functions Section 5.Gain selector switch 6.OUTPUT/AUTO KNEE selector switch 7.WHITE BAL (white balance memory selector) switch 8.MODE CHECK button 9.MARKER SELECT button 14.SAVE ON/OFF switch 15.HD SDI A · B (output signal selector) switch 16.MON OUT CHARACTER switch 17.HD SDI A connector 18.MON OUT (monitor output) connector 20. REW (rewind) button and lamp 21.STOP button 22.FF (fast forward) button and lamp 23.PLAY/PAUSE button 24.P2 card access LED 30.DVCPRO connector 31.REMOTE (remote control) connector 32.Option slot 33.SD memory card insertion slot 34.Busy (operation mode display) lamp Menu Operation Section Time Code Section Warning and Status Display Functions Display Window Functions LCD Monitor Viewfinder 15.Viewfinder left-rightposition anchoring ring 16.Viewfinder front-backposition anchoring lever Recording and Playback P2 Cards Page How to handle data recorded on P2 cards Basic Procedures Page Normal Recording Normal Recording and Native Recording PRE RECORDING function Variable Frame Rate (VFR) Recording Function Examples of VFR Recording Function Use Page Loop Recording Interval Recording Page Recording Review Function Normal and Variable Speed Playback Text Memo Function Shot Mark Function Recording Setting and Operation Mode Multi Format Video system and Recording format Selecting a recording signal and method Recording formats and output connector signal formats Page Adjusting the White balance and Black Balance Adjusting the White Balance Page Setting Color Temperature Manually Adjusting the Black Balance Setting the Electronic Shutter Shutter Modes Setting the Shutter Mode and Speed Placing the Unit in SYNCHRO SCAN Mode Assigning Functions to User Buttons Page Selecting Audio Input Signals and Adjusting Recording Levels Selecting Audio Input Signals Adjusting Recording Levels Selecting Function for the FRONT AUDIO LEVEL Control CH3 and CH4 Recording Levels Setting Time Data Description of time data Recording time code and user bits Setting of the user bits b c e f d e Setting the Internal Clock’s Date and Time Setting the Time Code Externally Locking the Time Code Page Page Page Providing an ID to the Camera Setting UMID Information CTL Count Setting and Display Viewfinder Screen Status Displays Lamps in the Viewfinder Screen Mode Check Screen Displays (MODE CHECK button function) Selecting Viewfinder Display Information Viewfinder Status Indication Layout Page Page Page Page Page Page Page Page Display Modes and Setting Changes/adjustment Result Messages Setting the Marker Displays Marker Check Screen Displays (MARKER SELECT button function) Checking Return Video Signal in the Viewfinder Adjusting and setting the LCD monitor Selection of video output signals Settings of signals output from HD SDI A · B connector Settings of signals output from MON OUT connector Handling data Handling SD memory cards SD memory card operations Page Page Page How to Use the User Data How to Use Scene File Data Page Page Resetting Menu Option Settings to Defaults Lens file How to provide lens files To save the lens file into the built-inmemory To read the lens file from the builtin memory To write in and read out the lens file to/from the SD memory card Page Chromatic Aberration Compensation (CAC) Page Page Page Preparation Power Supply Mounting the Battery and Setting the Battery Type CAUTION: Use of the external DC power supply Mounting the lens and Performing the Flange Back and White Shading Adjustments Page Page Preparing for Audio Input When Using the Front Microphone When Using a Wireless Receiver When Using Audio Devices Mounting the Camera on a Tripod Attaching the Shoulder Strap Attaching the Rain Cover Connection of the remote control unit (AJ-RC10G) Attaching the Front Audio Level Control Knob Connection of the external switch Thumbnail Manipulations Overview Thumbnail Screen 4.Recording mode 5.System mode 6.Duration 7.USB HOST mode indicator 8.Clip Number Selecting Thumbnails Playing back Clips Switching the Thumbnail Display Changing thumbnails Shot Mark Text Memo Adding a text memo Playing back a clip at the position where a text memo is recorded Deleting a text memo Using a text memo to break a clip and copy the necessary portion Deleting Clips Restoring Clips Copying Clips Setting of Clip Meta Data Page Page Setting of Proxy (optional) Formatting a P2 Card Formatting SD memory cards Setting the Thumbnail Display Mode Properties Clip Property Modification of recorded clip metadata P2 Card Status Display Write-protectMark P2 Card Status (remaining free space) P2 Card Status (used memory capacity) 3.P2 Card Remaining Capacity/Total Capacity 3.P2 Card used memory capacity/Total Capacity SD memory card Status Display Video Encoder Card Status Display (optional) Connection with external device Connection through the DVCPRO connector External device control through DVCPRO connection Directions for using the DVCPRO connection Connection with external devices using the USB 2.0 port Connection with a PC in the USB DEVICE mode USB HOST mode Switching to the USB HOST mode Using the USB HOST mode 1.PARTITION 2.VENDOR 3.MODEL 4.SIZE 5.USED 8.MODEL 9.DATE/TIME 10.SERIAL 11.VERIFY 12.NAME Page Page Maintenance and Inspections Inspections Before Shooting Preparing for Inspections Inspecting the Camera Unit Inspecting the Memory Recording Functions Maintenance Cleaning Inside the Viewfinder Phenomenon Inherent to CCD Cameras Replacing the Backup Battery Connector Signals PUSH Caution Page Page Warning System Warning Description Tables Page Page Error Codes Card Warning Code Warning and Error Display for Thumbnail Operation and USB HOST MODE Page Menu Menu Configuration Page Setting Menu Options Selecting Options for USER MENU Menu Description Tables SYSTEM SETTING Page Page Page Page Page PAINT Page Page Page Page Page Page Page Page Page Page Page Page CAM OPERATION Page Page Page Page MAIN OPERATION Page Page Page Page Page FILE Page Page MAINTENANCE Page OPTION MENU Updating the firmware incorporated into the unit Specifications Digital Video System Audio Characteristics Page Software information for this product For business users in the European Union Information on Disposal in other Countries outside the European Union Note for the battery symbol (bottom two symbol examples):