Setting of Proxy (optional)

By attaching the video encoder card (AJ-YAX800G, optional) either to the optional slot or slot 5, it is possible to specify the proxy recording setting.

The video encoder card is not recognized when inserted if the power for the unit is turned on. Insert the video encoder card after turning off the power for the unit.

Select OPERATION  DEVICE SETUP  PROXY from the thumbnail menu to specify the setting.

For the method of installation and the settings of the video encoder card, refer to the operation manual of the video encoder card.

Notes

To use the proxy function in 24PN (Native) mode, the FPGA version of the video encoder card firmware must be updated to [B102] or higher. For the method to confirm the FPGA version of the video encoder card firmware, refer to [Video Encoder Card Status Display (optional)]

(page 140). For instructions on updating, refer to the P2 support page on the following website.

https://eww.pavc.panasonic.co.jp/pro-av/

When “PROXY CARD ERROR” is indicated in the viewfinder, either check the video encoder card or set the unit so that proxy recording is not performed.

Formatting a P2 Card

1

Press the THUMBNAIL button.

3 The following screen appears. Use the cursor buttons

 

The thumbnail screen appears on the LCD monitor.

and the SET button to select YES.

2

Press the THUMBNAIL MENU button and select

 

 

OPERATION  FORMAT from the thumbnail menu.

 

The following screen appears. Select the slot number for the P2 card you want to format, then press the SET button.

Select EXIT if formatting is not required.

4 The selected P2 card is formatted.

134 Manipulating Clips with Thumbnails: Setting of Proxy (optional)