Information Item

Indication

Status

 

 

13.

System

SYSTEM ERROR-

Something abnormal is happening to the internal computer communications or

 

 

information and

 

reference signal. No further recording or playback can be performed.

is

 

warnings

 

replaced with an error code. For more information, see [Error Codes]

 

 

 

 

 

(page 158).

 

 

 

 

TURN POWER OFF

P2 card has been removed while being accessed (recorded, played back, or

 

 

 

formatted), and subsequent operation is disabled.

 

 

 

 

CARD ERR

An error has occurred while recording data to or playing data from a P2 card. In

 

 

 

the actual indication the is replaced by the slot number of the P2 card that

 

 

 

triggered the error.

 

 

 

 

REC WARNING

Something abnormal is happening to video and/or audio being recorded.

 

 

 

 

BACKUP BATT EMPTY

Backup battery needs replacing.

 

 

 

 

FAN STOP

The fan is locked and halted.

 

 

 

 

WIRELESS-RF

RF signal from the wireless receiver is degraded.

 

 

 

 

EOM

P2 card has no free space.

 

 

 

 

BOS

Playback position is at the start of all the clips.

 

 

 

 

EOS

Playback position is at the end of all the clips.

 

 

 

 

CANNOT REC

Indicates that it is not possible to record to a P2 card directly after insertion or

 

 

 

switching on the power. Detailed information is provided on the FUNCTION

 

 

 

screen of MODE CHECK. See the relevant section of the 10. MODE CHECK

 

 

 

indication area.

 

 

 

 

CANNOT PLAY

Clip cannot be played back perhaps because no P2 card is loaded, or the P2

 

 

 

card contains no clips.

 

 

 

 

COMM ERROR

Displayed when disconnection between microcomputers continues for a

 

 

 

 

 

specified period or longer.

 

 

 

 

TEXT MEMO

Text memo has been added.

 

 

 

 

TEXT MEMO INVALID

Text memo has not been successfully added.

 

 

 

 

MARK ON/OFF

Shot mark has been added or deleted. For information on shot marks, see

 

 

 

[Shot Mark Function] (page 45).

 

 

 

 

SHOT MARK INVALID

This is displayed when shot marks cannot be added.

 

 

 

 

UPDATING

Clip information is being updated. Playback operation disabled.

 

 

 

 

USB DEVICE

The unit is in USB DEVICE mode. When communication is disabled, the

 

 

 

 

 

indication blinks.

 

 

 

 

USB HOST

Indicates that the unit is set to the USB HOST mode. When the external hard

 

 

 

disk is not successfully recognized, then the indication blinks.

 

 

 

 

THUMBNAIL OPEN

Thumbnail is being manipulated.

 

 

 

 

1394 INITIAL ERROR

Displayed when the connection of the DVCPRO connector is abnormal.

 

 

 

 

PROXY REC P2&SD

Displayed when proxy recording on either the P2 card or the SD memory card

 

 

 

starts (when AJ-YAX800G is attached, the PROXY REC item on the <VF

 

 

 

 

 

INDICATOR3> screen is turned on).

 

 

 

 

PROXY REC P2

Displayed when proxy recording on the P2 card starts (when AJ-YAX800G is

 

 

 

attached, the PROXY REC item on the <VF INDICATOR3> screen is turned

 

 

 

on).

 

 

 

 

NEAR END (SD)

When the remaining free space on the SD Memory card drops below 1 minute

 

 

 

during proxy recording, the message is displayed (when AJ-YAX800G is

 

 

 

 

 

attached).

 

 

 

 

EOM (SD)

Displayed when full capacity is reached during proxy recording on the SD

 

 

 

 

 

memory card (when AJ-YAX800G is attached).

 

 

 

 

PROXY CARD ERROR

Displayed when proxy recording stops because of failure on either the video

 

 

 

encoder card or the stream. Check the video encoder card or avoid use of

 

 

 

 

 

proxy recording. (When AJ-YAX800G is attached.)

 

 

 

 

SD CARD WRITE ERR

Displayed when a failure occurs on the SD memory card during proxy

 

 

 

 

 

recording, and only recording on the SD memory card stops (when AJ-

 

 

 

 

 

YAX800G is attached).

 

 

 

 

TC REGEN

The RET button was pressed to regenerate the time code as the time code for

 

 

 

the last clip recorded on a P2 card.

 

 

 

 

SLOT SEL

This blinks while the recording slots of P2 cards are switched after pressing the

 

 

 

user button where the SLOT SEL function is assigned.

 

 

 

 

SLOT SEL INVALID

This is displayed if the recording slots of P2 cards cannot be switched when

 

 

 

the user button where the SLOT SEL function is assigned is pressed.

 

 

 

 

DIR NG CARD

This is displayed when a P2 card with an irregular directory structure is

 

 

 

 

SLOT1/2/3/4/5

inserted or when beginning or ending a recording to an inserted card having

 

 

 

such a directory structure.

 

 

 

 

RUN DOWN CARD

This is displayed when the recording starts or completes with a P2 card on

 

 

SLOT1/2/3/4/5

which the maximum number of overwrites has been exceeded, or when data is

 

 

 

recorded after inserting such a P2 card.

 

 

Recording for Settings and Adjustments

Adjustments and Settings for Recording: Viewfinder Screen Status Displays

79