Information Item

 

 

 

 

Indication

 

Status

 

1.

System mode

1080-59.9i

 

This indicates the mode that the unit operates in.

 

 

 

 

 

1080-59.94 interlace mode

 

 

 

 

1080-23.9PsF

 

1080-23.98 segment frame mode

 

 

 

 

1080-24.0PsF

 

1080-24 segment frame mode

 

 

 

 

1080-50i

 

 

1080-50 interlace mode

 

 

 

 

720-59.94P

 

720-59.94 progressive mode

 

 

 

 

720-60P

 

 

720-60 progressive mode

 

 

 

 

720-50P

 

 

720-50 progressive mode

2/43.

Frame number

 

 

 

 

 

 

The shooting frame number is displayed next to the recording frame number

 

 

 

for shooting and

 

 

 

 

 

 

(including native recording) and the recording type (progressive/interlacing).

 

 

 

recording

 

 

 

P:

i

 

Examples: In the case of 24PN recording and 12 frame shooting, “12P:24PN”

 

 

 

 

At native recording

is displayed.

 

 

 

 

 

 

 

P:

PN

 

In the case of 12P Over 59.94i, “12P:60i” is displayed.

 

 

 

 

 

 

 

 

 

 

When the VFR function is “ON”, the shooting frame number is displayed with

 

 

 

 

 

 

 

 

 

 

black and white reversed. When operating in SYNCHRO SCAN mode, the

 

 

 

 

 

 

 

 

 

 

shooting frame number blinks.

3.

REC FORMAT

 

 

 

 

 

 

This indicates the recording mode.

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

DVCPROHD

 

DVCPROHD is also displayed in the native recording.

 

 

 

 

 

DVCPRO HD recording (including native recording)

 

 

 

 

AVC-I100

 

 

AVC-Intra100 recording

 

 

 

 

AVC-I50

 

 

AVC-Intra50 recording

4/41.

Shutter speed/

X1/ .

, X

. d

This indicates that the shutter speed is set to SYNCHRO SCAN.

 

 

 

mode

XX1/

.

 

This indicates that the shutter speed is set to SYNCHRO SCAN2.

 

 

 

 

1/50 (1/60) - 1/2000,

This indicates that a fixed shutter speed has been set.

 

 

 

 

HALF,

.

d

 

 

5.

P2 card remaining

 

 

 

min

 

 

The indication “

min” stays illuminated under normal conditions or blinks

 

 

free space

 

 

 

 

 

 

when the remaining level is near zero.

 

 

 

 

END

 

 

When the card space is used up, “END” blinks.

 

 

 

 

WP

 

 

WP is illuminated when the P2 card is write-protected.

 

 

 

 

LOOP

 

 

LOOP is illuminated when the LOOP REC mode is set. When loop recording

 

 

 

 

 

 

 

 

 

 

cannot be performed, for example because the P2 card has no free space, the

 

 

 

 

 

 

 

 

 

 

indication blinks.

 

 

 

 

 

INFO P2

 

 

P2 card being recognized.

 

 

 

 

/

 

 

 

Total free space/capacities of the P2 cards (when MODE CHECK is being

 

 

 

 

 

 

 

 

 

 

performed).

 

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

 

 

 

 

 

When the menu option P2CARD REMAIN is set to “ONE-CARD”, the number

 

 

 

 

 

 

 

 

 

 

of the P2 card slot that contains the target card is indicated, together with the

 

 

 

 

 

 

 

 

 

 

remaining space.

 

 

 

 

 

 

 

 

 

 

 

For more information, see [P2 Card Remaining Free Space/capacity Indication]

 

 

 

 

 

 

 

 

 

 

(page 82).

 

 

 

 

 

 

 

 

 

 

 

With lower frame rates under VFR operation during native recording, the

 

 

 

 

 

 

 

 

 

 

display period may lengthen for the indication that little space remains on the

 

 

 

 

 

 

 

 

 

 

P2 card.

 

6.

P2 card remaining

 

 

 

min

 

The number of the P2 card slot that contains the target card and the remaining

 

 

 

 

 

free space (when

 

 

 

 

 

 

free space are indicated (when MODE CHECK is being performed). In LOOP

 

 

MODE CHECK is

 

 

 

 

 

 

REC mode, an indication of estimated recording time appears. For more

 

 

being performed)

 

 

 

 

 

 

information, see [Loop Recording] (page 40). This indication also appears

 

 

 

 

 

 

 

 

 

 

when the target P2 card has been switched with a user button.

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

 

 

 

 

 

Under VFR operation in native recording, the amount of free space increases

 

 

 

 

 

 

 

 

 

 

as the frame rate is lowered.

7.

Unit REC indication

REC

 

 

When an external device is controlled through the 1394 connection (when the

 

 

 

 

 

 

 

 

 

 

1394 CONTROL option is set to “BOTH”), the recording status of the unit is

 

 

 

 

 

 

 

 

 

 

displayed using characters. The indication stays illuminated during recording.

 

 

 

 

 

 

 

 

 

 

This is displayed when the menu option REC TALLY of the <OPTION MODE>

 

 

 

 

 

 

 

 

 

 

screen is set to “CHAR”.

 

 

 

 

 

 

 

 

 

 

This can also be displayed during the recording using the unit alone.

 

 

 

 

 

 

 

 

 

 

This is displayed when the menu option REC STATUS of the <VF

 

 

 

 

 

 

 

 

 

 

INDICATOR3> screen is set to “ON”.

76

Adjustments and Settings for Recording: Viewfinder Screen Status Displays