2-2. Outdoor Unit
AVOID:
heat sources, exhaust fans, etc. (Fig. 3)
damp, humid or uneven locations.
DO:
NO | Exhaust fan |
Hot air
Heat source
Outdoor unit
choose a place as cool as possible. |
choose a place that is well ventilated. |
install in a location where at least two sides are unob- |
structed, so that the flow of air at the intake port or |
exhaust port is not blocked, and so that sufficient |
space is ensured for maintenance to be carried out |
without trouble. In general the top also must be unob- |
structed. (Figs. 4a and 4b) |
provide a solid base (level concrete pad, concrete |
block, 4" 1'4" (10 40 cm) beams or equal), a mini- |
mum of 4" (10 cm) above ground level to reduce |
humidity and protect the unit against possible water |
damage and decreased service life. (Fig. 5a) |
install cushion rubber under unit’s feet to reduce |
vibration and noise. (Fig. 5b) |
use lug bolts or equal to bolt down unit, reducing |
vibration and noise. |
Fig. 3
Air intake | Min. 2" (5 cm) | Valve | |
|
| side | |
|
| Min. 10" | |
|
| (25 cm) | |
Min. | Air discharge Min. |
| |
2" (5 cm) |
| ||
8" (20 cm) | |||
|
Fig. 4a
Obstacle above | Obstacle | ||
dischargeAir |
|
| |
|
| Min. | Min. |
| 7' (2 m) 7' (2 m) | ||
Ground | Min. 2" (5 cm) | ||
|
| Air intake |
install in a location where no antenna of a television |
or radio exists within 10' (3 m). |
| Obstacle above |
Anchor bolts (4 pcs.)
Air intake | Min. 4" (10 cm) Valve | |
| side | |
| Min. 10" | |
| (25 cm) | |
Min. | Air discharge Min. | |
2" (5 cm) | ||
1'4" (40 cm) | ||
|
Fig. 4b
Airdischarge |
|
| Obstacle |
|
| Min. | Min. |
| 7' (2 m) 7' (2 m) | ||
Ground | Min. 4" (10 cm) | ||
|
| Air intake |
Air intake
Concrete or equal
Min. 4" (10 cm)
|
|
|
|
|
|
|
|
| cm) |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
About |
|
|
| About | (10 | ||||
|
|
|
|
| 4" |
| |||
|
| 1'4" | (40 |
|
|
| |||
|
|
|
|
|
|
|
| ||
|
|
| cm) |
|
| ||||
|
|
|
|
|
|
Fig. 5a
Cushion rubber
Fig. 5b
6