Troubleshooting
Troubleshooting guide
Messages on the unit’s display
The following messages or service numbers appear on the unit’s display when something unusual is detected.
DVD
(“∑” stands for a number.)
The remote control and main unit are using different codes. Change the code on the remote control. (> 83)
GUIDE
TV Guide data is being downloaded.
HARD ERR
If there is no change after switching the unit to standby mode and turning it on, consult the dealer.
NoERAS
You cannot delete items on this disc. The disc may be damaged.
NoREAD
•The disc is dirty. (> 9) The unit cannot record, play, or edit.
•The lens cleaner has finished cleaning. Press [< OPEN/CLOSE] on the main unit to eject the disc.
NoWRIT
You cannot write to this disc.
The disc may be damaged. Use a new disc.
PLEASE WAIT
•Displayed when the unit is started and is switched to standby mode.
•There was a power failure or the AC plug was disconnected while the unit was on. The unit is carrying out its recovery process. Wait until the message disappears.
PROG FULL
There are already 32 timer programmes. Delete unnecessary timer programmes. (> 28)
88 VQT4C71
