Getting started
Control reference guide
Main unit
Press [< OPEN/CLOSE] to open the tray and insert or remove a disc.
SD card 
USB memory
1Standby/on switch (Í/I)
Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
2Recording indicator
•The indicator will light up while recording.
•The indicator will blink while recording is paused and before recording starts.
3Remote control signal sensor
•Angle: Approx. 20° up and down, 30° left and right
•Distance: Within approx. 7 m in front of the unit
4Open/close disc tray
5 Disc tray
6 SD card slot
•When removing the SD card, press on the centre of the card and pull it straight out.
7USB port
8Channel select
9Start recording (> 23) : Stop
; Start play
Pull to flip down the front panel.
<Display
|
| 1 |
| 2 | 3 |
HDDSDVD |
|
| COPY |
| |
| SD USB |
| |||
|
|
|
| ||
|
|
| PLAY |
| |
4 | 5 | 6 | 7 | 8 | 9 |
1SD card slot indicator
2Copying indicator
3Disc indicator
4Drive (HDD, DVD or SD) indicator
5Remote control signal indicator
6Main display section indicator
-Current time
-Playback counter
-Various messages (> 88)
7Playback indicator
8USB port indicator
9Timer recording indicator
• This indicator lights up when the timer recording standby is activated.
•While writing to/reading from the media, do not switch the unit to standby mode or remove the media. Such action may result in loss of the media contents.
•When inserting the media, ensure that it is facing the right way up.
12 VQT4C71
