Getting started
VQT4C71 17
1Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
2Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial
power on.
3Follow the on-screen instructions and
perform the settings.
• When the Download from TV screen
appears, the setting information on the TV
is acquired by this unit. (>62)
• When the Auto Setup screen appears, the
unit searches for the terrestrial digital
channels. It takes about 3 minutes.
After tuning has been completed, clock will
be set automatically.
If the clock setting screen appears, set the
time manually (>78, Clock).
4Set “Power Save” to “On”, “On Timer” or
“Off”, then press [OK].
•On
It will go into the Power Save in Standby
mode.
•On Timer
Set the period of power save and then
press [OK].
• Power Save in Standby mode is activated
at the set time period.
•Off
It is possible to start quickly from the
standby mode. (Quick Start mode)
When “Easy Setting has been completed.”
appears, Easy setting is complete.
To stop partway
Press [RETURN ].
To restart set up
1 While stopped
Press [SETUP]. (>16)
2 Select “Auto Setup” in “Digital TV Tuning”,
then press [OK].
3 Select “Yes”, then press [OK].
If the TV aspect setting screen appears
Refer to “TV Aspect”. (>74)
To confirm that channels have been tuned
correctly
Refer “Using Channel List”. (>20)
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
Easy setting
Scan
Digital TV Auto Tuning
CH 6 69
RF Ch
Digital TV: 2
Searching
Quality
Type
Channel Name
RETURN
This will take about 3 minutes.
35 10
10
35
Digital TV
Digital TV
OK
RETURN
Power Save in Standby
Standby power consumption is saved by disabling
Quick Start function.
Unit’s Display is set to “Automatic”.
From To
Power Save
0 6
On
DMRXW390GL-VQT4C71_eng.book 17 ページ ２０１２年２月２７日 月曜日 午前９時２０分