Watching broadcasts
Watching broadcasts
Operations while watching broadcast
To show subtitle
When “ 
” appears in channel information (> 21)
Press [STTL 
].
• Press again to hide subtitle.
Switching audio
Press [AUDIO].
•Audio will switch according to the contents of the programme every time it is pressed.
To show Teletext
When “ 
” appears in channel information (> 21)
1Press [TEXT 
].
2Use [3, 4, 2, 1], number buttons or colour buttons, etc. according to
• You can change the display mode. (> 66, 74, Teletext)
Aspect
You can switch the screen mode.
Refer to “Switching the aspect ratio of the screen”. (> 81)
PAUSE LIVE TV
When you pause a live TV programme, temporary save starts. Then you can restart watching from the paused position.
1 While watching TV: Press [PAUSE ;].
2 When you want to resume: Press [PLAY/a1.3 1].
• You can perform search or Quick View, etc.
Display information
Press [STATUS 
] a few times.
18:53:50 01.01.2012
|
|
|
|
|
| Live 18:53.50 |
| Play 18:40.12 |
|
1Current time
2The time when the picture currently displayed on the television was broadcasted
3The amount of time temporarily saved on HDD.
To stop PAUSE LIVE TV
1Press [STOP ∫].
2Select “Yes”, then press [OK].
To hide the display information
Press [EXIT]
•Temporary save is stopped in following cases.
-When save time exceeds 8 hours (This may vary depending on the HDD free space.)
-When save time exceeds 1 hour with no HDD free space
-When two programmes are recorded simultaneously
-When a timer recording from external input started. (PAUSE LIVE TV from external equipment)
•The PAUSE LIVE TV function does not work
-The clock is not set.
-While two programmes simultaneous recording
-While watching a programme being recorded
-When a radio programme is selected
•You can operate this unit with the TV remote control by using VIERA Link (> 62).
Refer to the TV operating instructions.
22 VQT4C71
