Troubleshooting
REMOVE
The USB device is drawing too much power. Remove the USB device.
START
Update of the software (firmware) is started. You cannot operate the unit until the update is complete. (> 80)
SW-DL
Software (firmware) is downloading.
Download will stop when the unit is turned on, or the timer recording starts. (> 80)
UNSUPPORT
The media is not supported.
UPD /
(“∑” stands for a number.)
The software (firmware) is being updated. You cannot operate the unit until the update is complete. (> 80)
U59
The unit is hot.
The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears.
Do not block the cooling fan on the rear of the unit.
U61
(When a disc is not inserted) A malfunction has occurred. The unit is trying to restore to the normal operation. Once the message disappears you can use the unit again.
If it remains displayed, consult the dealer.
U72, U73
The HDMI connection acts unusually.
-The connected equipment is not HDMI compatible.
-Please use HDMI cables that have the HDMI logo.
-The HDMI cable is damaged.
VQT4C71 89
