131
VQT1T64
VIERA Link does not
work.
≥Connect with a HDMI mini cable (optional). (l93)
≥Press the MENU button, then select [SETUP] #
[VIERA Link] # [ON] with the cursor button. (l93)
≥Depending on HDMI terminal of the TV, the input channel
may not switch automatically. In this case, use the remote
control for the TV to switch input. (For details on how to
switch input, please read the operating instructions for the
TV.)
≥Check the VIERA Link setting on the connected device.
≥Turn the power to the unit off and then back on again.
≥Set [VIERA Link] to [Off] on the TV and then turn it back to
[On]. (Refer to the operating instructions of the TV for
details.)
When connected by the
USB cable, this unit is not
detected by the PC.
≥Select another USB terminal on the PC.
≥Check the operating environment. (l111)
≥Turn the power to the unit off and then back on again and
reconnect the USB cable.
When the USB cable is
disconnected, an error
message will appear on
the PC.
≥To disconnect the USB cable safely, double-click the
( ) icon in the task tray and follow the instructions on the
screen.
The power of the DVD
burner cannot be turned
on.
≥When the unit is connected to the DVD burner, use the
respective AC adaptors for both this unit and the DVD
burner.
Cannot see the PDF
operating instructions for
HD Writer 2.6E.
≥You will need Adobe Acrobat Reader5.0 or later or Adobe
Reader 7.0 or later to read the PDF operating instructions
for HD Writer 2.6E.
Cannot copy scenes on
the SD card by
connecting to other
equipment with the USB
cable.
≥Other equipment might have not recognized the SD card.
Unplug the USB cable once, and reconnect it.
Problem Check points
HDCSD100P-VQT1T64_ENG.book 131 ページ ２００８年７月１４日 月曜日 午後８時２分