68
VQT1T64
Displays the luminance level of the center of the screen (luminance display frame) in %.
It makes the adjustment of the brightness of the object easier, by checking the luminance level of the
object, when recording same object in different surroundings.
Adjust the brightness using [IRIS]. (l72)
Set the AUTO/MANUAL switch to MANUAL. (l64)
Select the menu. (l29)
[OFF]:
Not display
[ALWAYS]:
Constantly display
[ON ADJUST]:
Display only when [IRIS] is adjusted. (l72)
This function’s default setting is [ON ADJUST].
ALuminance display frame
BLuminance level
Luminance level is displayed between [0%]
and [99%]. It will be displayed as [99% ] when
it is over 99%.
When the luminance display is set to
[ALWAYS] or [ONADJUST], luminance is
displayed while adjusting [IRIS] even if
[DISPLAY] is set to [OFF].
A graph with brightness as horizontal axis and number of pixels at that brightness as vertical axis is
displayed. It is possible to determine the exposure of the whole image by looking at the distribution in
the graph.
Adjust the brightness using [IRIS]. (l72)
Set the AUTO/MANUAL switch to MANUAL. (l64)
Select the menu. (l29)
[OFF]:
Not display
[ALWAYS]:
Constantly display
[ON ADJUST]:
Display only when [IRIS] is adjusted. (l72)
This function’s default setting is [ON ADJUST].
Example of the display
ANormal
BDark
CBright
When the histogram display is set to [ALWAYS]
or [ON ADJUST], histogram is displayed while
adjusting [IRIS] even if [DISPLAY] is set to
[OFF].
Luminance
[ADVANCED] # [LUMINANCE] # desired
setting
50%
Histogram
[ADVANCED] # [HISTOGRAM] # desired
setting
HDCSD100P-VQT1T64_ENG.book 68 ページ 2008年7月14日 月曜日 午後8時2分