61
VQT1T64
Built-in flash When the button is pressed, the flash is activated and the
picture will be recorded. Use the built-in flash in order to record
still pictures in dark places.
Select the menu. (l29)
[RECORD SETUP] # [FLASH] # [AUTO] or [ON]
≥This function’s default setting is [AUTO].
≥When the button is pressed halfway, the flash indicator will
appear in the bottom left corner of the screen.
[ON]: ß
[AUTO]: ßA
[OFF]:
≥When [AUTO] is set, the ambient brightness is automatically
detected, and the flash will activate only when necessary. (If the
flash is not necessary, the [ßA] indicator will not appear when the
button is pressed halfway.)
∫To adjust the brightness of the flash
Select the menu. (l29)
[RECORD SETUP] # [FLASH LEVEL] # desired setting
[ßj]: Less brighter
[ßd0]: Normal
[ßi]: Much brighter
Red eye reduction Reduces the phenomena where human eyes become red from
flashes.
Select the menu. (l29)
[RECORD SETUP] # [RED EYE] # [ON]
Shutter sound You can add a shutter sound when recording still pictures.
Select the menu. (l29)
[RECORD SETUP] # [SHTR SOUND] # [ON]
≥This function’s default setting is [ON].
Auto slow shutter You can record bright pictures even in dark places by slowing
the shutter speed.
≥The Intelligent auto mode is set to [OFF]. (l51)
Select the menu. (l29)
[ADVANCED] # [AUTO SLOW SHTR] # [ON]
≥The shutter speed is adjusted between 1/30 and 1/250 depending
on the surrounding brightness. (When adjusting the shutter speed
manually, it can be adjusted between 1/30 and 1/8000.)
≥If [AUTO SLOW SHTR] is set to [OFF], then the shutter speed will
be set between 1/60 and 1/250. (When adjusting the shutter
speed manually, it can be adjusted between 1/60 and 1/8000.)
Function Effect/Setting method
HDCSD100P-VQT1T64_ENG.book 61 ページ ２００８年７月１４日 月曜日 午後８時２分