129
VQT1T64
Some playback images
are skipped
automatically.
Scene does not playback
to the end.
The playmode is set to (Intelligent scene selection).
Change the playmode to (All scenes). (l78)
Although this unit is
correctly connected to a
TV, images cannot be
seen.
The images are squeezed
horizontally.
Please read the operating instructions of your TV and
select the channel that matches the input used for the
connection.
Change the [TV ASPECT] setting to match the aspect ratio
of the TV.
If both HDMI mini cable and component cable are
connected, set the unit to playback mode.
Change the setting of the unit depending on the cable
connecting to the TV. (l91)
Scenes cannot be
deleted.
Protected scenes cannot be deleted. Release the protect
setting. (l85)
Any scenes/still pictures where the thumbnails are
displayed as cannot be deleted. If the scenes/still
pictures are unnecessary, format the SD card to erase the
data. (l87) Please be aware that if an SD card is
formatted then all the data recorded on the SD card is
erased and cannot be recovered. Back up important data
on a PC, disc etc.
If the SD card’s write protect switch is set to LOCK, then
deletion is disabled. (l26)
The images on the SD
card do not look normal.
The data may be destroyed. It may have been destroyed by
static or electromagnetic waves. Back up important data on
a PC, disc etc. as well.
If the SD card is inserted
in this unit, it is not
recognized.
If the SD card is formatted on a PC, it may not be
recognized by this unit. Use this unit to format SD cards.
(l87)
If the SD card is inserted
in another device, it is not
recognized.
Check that the device is compatible with the capacity or
type of SD card (SD Memory Card/SDHC Memory Card)
that you inserted. Refer to the operating instructions of the
device for details.
Problem Check points
HDCSD100P-VQT1T64_ENG.book 129 ページ 2008年7月14日 月曜日 午後8時2分