54
VQT1T64
Self-timer This is for recording still pictures using the timer.
Each time the [ ] icon is selected, the indication changes by
one setting in the following order:
[Ø10] # [Ø2] # setting canceled
Ø10: Records after 10 seconds
Ø2: Records after 2 seconds
≥When the button is pressed, a still picture is recorded
after the [Ø10] or [Ø2] display and the recording lamp flashes
for the time which has been set.
≥After recording, the self-timer is canceled.
≥In Auto focus mode, if the button is pressed halfway once
and then fully, the lens focuses on the subject when the
button is pressed halfway.
≥If the button is pressed fully all at once, the lens focuses
on the subject just before recording.
≥Depending on the time taken to bring the subject into focus,
the recording may take longer than set to start.
To stop the timer midway through
Press the MENU button.
Intelligent contrast control
This brightens parts that are in shadow and difficult to see
and suppresses white saturation in bright parts at the same
time. Both bright and dark parts can be recorded clearly.
Function Effect
HDCSD100P-VQT1T64_ENG.book 54 ページ ２００８年７月１４日　月曜日　午後８時２分